JOYJOM PTM7950 Phase Change Thermal Pad 31x50x0.25mm (1.22x1.97x0.01 inches) | 8.5W/mK High Conductivity for Laptops, GPUs, SSDs

• PTM7950 is a highly thermally conductive Phase Change Material (PCM) that lasts longer and is more effective than tradiational thermal paste.
• Size 31x50x0.25mm, Phase change at 45°C, Thermal Conductivity: 8.5 W/m.K, It is normal for it to melt at high temperatures.It achieves good heat dissipation performance through repeated melting and solidification. Note: it requires technical and operational skills, it is recommended to use under the guidance of professionals
• PTM7950 is a proprietary material that provides superior reliability (pass 150˚C baking 1000 hours, T/C-B 1000 cycles) and maintains low thermal impedance (<0.04˚Ccm2/W @ no shim), making the PTM7950 series desirable for high performance integrated circuit devices.
• PTM7950, based on a novel polymer PCM system, exhibits excellent interface wetability during typical operating temperature ranges, resulting in extremely low surface contact resistance.
• Package include: 1x PTM7950 Thermal Pad 31x50x0.25mm, 1x Screwdriver, 1x Cleaning Wipe, 1x Spatula, Finger gloves, 1x Cleaning Brush

• Power off and disassemble your device. Clean the CPU/GPU/SSD surface and the heatsink contact area thoroughly using the included cleaning wipe to remove old paste or dust. — Prepare Surfaces
• Carefully cut the 31x50x0.25mm PTM7950 pad to the required size for your component. Place it evenly onto the chip surface, ensuring full contact without stretching or tearing. — Apply the Pad
• Gently place the heatsink over the pad, ensuring proper alignment. Reassemble your device, securing all screws and components. Professional guidance is recommended for this step. — Reassemble Device

Typical situations where JOYJOM PTM7950 Phase Change Thermal Pad 31x50x0.25mm (1.22x1.97x0.01 inches) | 8.5W/mK High Conductivity for Laptops helps — illustrative scenarios, not customer reviews.