VCE Shielded Cat6 RJ45 Connectors, 25-Pack | 10 Gbps 250MHz Transmission

• Precision Compatibility: VCE Shielded RJ45 pass through connectors support 24 to 26 AWG solid or stranded cables with outer diameter 0.93 mm to 1.04 mm, CAT6 23awg is supported for solid cable only. The wire OD of network cables with the same AWG specifications may vary depending on the manufacturer. Please ensure AWG and OD MUST BOTH meet the requirements
• Gigabit Performance: Cat 6 RJ45 pass-through connectors has better metal material，gold plated contacts deliver 10 Gbps speeds compatible with Cat6/5E cables and devices like personal computer, security cameras, routers, switches, printers, and servers. Operates in -20℃~75℃ extremes with ≥1,250 mating cycles, ensuring your usage long-term stability
• Signal Protection: Triple layer metal shell EMI RFI Shielding blocks interference to prevent data loss and maintain ground connectivity ideal for high noise environments like factories, hospitals, server rooms, etc
• Easy Installation: Wires feed completely through the connector enabling fast crimps with any pass through tool no manual wire alignment needed saving time on network setups.These Category 6 connectors work effectively with all standard pass-through crimping tools
• CUSTOMER FIRST: You will get 25 x Cat6 pass-through shielded connectors + 1 x operating instruction. We always prioritize our customer experience. If you have any problems or advice about our products, please don't hesitate to contact us. We will do our best to resolve your issue within 24 hours.

• Prepare the Cable — Strip approximately 1 inch of the outer jacket from your Cat6 cable. Untwist the pairs to the required length, ensuring they remain as untwisted as possible. Trim the wires to ensure they are all the same length.
• Feed Wires Through Connector — Carefully insert the prepared wires into the VCE pass-through connector. Ensure each wire goes into its corresponding channel and feeds completely through the front of the connector.
• Crimp and Trim — Using a compatible pass-through crimping tool, crimp the connector onto the cable. The tool will simultaneously crimp the contacts and trim the excess wires flush with the connector face.
• Verify Connection — Visually inspect the termination to ensure all wires are correctly seated and crimped. Test the cable with a network cable tester to confirm continuity and proper function.

Typical situations where VCE Shielded Cat6 RJ45 Connectors helps — illustrative scenarios, not customer reviews.