JEYI i9 Zebra 2230C Wire-Free M.2 NVMe Enclosure 40mm | USB-C 10Gbps Portable SSD Adapter

• This JEYI 2230 M.2 enclosure turns your NVME M.2 2230 solid state drive into a portable, high speed USB 3.2 Gen2 drive (10Gbps transmission speed, 1Gb file in 1 second). Obtain maximum performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB 3.2 computer system.
• This NVMe M2 Adapter no need to use a data cable for connection; simply open our protective cover (with magnetic attraction), and you can connect to the device via the USB-C interface to access the data inside the NMVe hard drive. This design is very convenient, just like using a USB flash drive.
• This JEYI 2230 M.2 to USB Enclosure adapter built in latest lower power consumption and more stable performance of the JMS583 A3 master chip, support TRIM command, to avoid the SSD master to erase these files when the remaining space is not enough, resulting in the master to perform the work of erase + write at the same time, the load is too large and therefore dropping speed.
• The enclosure on the M.2 hard drive enclosure supports UASP, enabling you to achieve transfer speeds up to 100% faster than traditional USB 3.0 when used with a UASP-enabled host computer.The enclosure on the M.2 hard drive enclosure supports UASP, enabling you to achieve transfer speeds up to 100% faster than traditional USB 3.0 when used with a UASP-enabled host computer.
• For further convenience, the 2230 M.2 SSD to USB 3.2 enclosure is USB-powered and requires no external power adapter. For wide compatibility with all the common M.2 solid state drives, the enclosure can mount ONLY 2230 NVME M.2 SSDs. Plus, the external SSD reader is compatible with any operating system, including Windows and Mac to ensure you can use it with any computer.
• Built to last durable aluminum construction on the M2 NVME helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the portable hard drive enclosure features a specially engineered ventilation aluminum surface also free thermal compound pad to fill the gap of the enclosure and SSD chips which help maintain a cooler operating environment for optimal performance and a longer life span for your drive.
• This slim, pocket-sized aluminum external enclosure has been specifically engineered for mobility. It features a lightweight yet durable design, which fits easily into your pocket or laptop bag.
• Put the SSD in this Enclosure Adapter, you can easily file backup, disk upgrade, clone, data recovery, and storage expansion with your Mobile, game console, and laptops. And it is support Win to Go(WTG)

• Prepare Your SSD — Ensure you have an M.2 2230 NVMe PCIe SSD (M Key or B+M Key). If the SSD is new, it may need to be initialized and formatted. If it contains data, back it up before proceeding.
• Install the SSD — Gently slide the M.2 2230 NVMe SSD into the enclosure's connector. Secure the SSD with the provided screw. The enclosure features a tool-free design for easy access and installation.
• Connect to Device — Open the magnetic protective cover on the enclosure to reveal the built-in USB-C connector. Plug it directly into a USB-C or Thunderbolt port on your laptop, tablet, phone, or gaming console.
• Access Data — Your device should recognize the enclosure and the installed SSD. You can now access, transfer, or clone data at speeds up to 10Gbps. For Windows To Go, ensure your system supports booting from USB.

Typical situations where JEYI i9 Zebra 2230C Wire-Free M.2 NVMe Enclosure 40mm | USB-C 10Gbps Portable SSD Adapter helps — illustrative scenarios, not customer reviews.