Leviton Extreme 6+ QuickPort Connector CAT 6 200 MHz 10 meters (32.8 ft) | TIA/EIA Certified

• Connector body is high-impact, fire-retardant plastic rated UL 94V-4
• TIA/EIA channel performance limits total length of patching and equipment cords to 32 feet (10 meters) per TIA/EIA-568-B
• 14 colors for color-coding or organization; available in six standard lengths
• All connectors feature standard QuickPort compatibility and universal color coded wiring labels
• eXtreme 6+ system components meet or exceed the requirements for channel and component-level performance for TIA/EIA Category 6, cULus Listed, NOM and ACA

• Strip approximately 1 inch of the outer jacket from the CAT 6 Ethernet cable using a cable stripper. Untwist the pairs slightly, ensuring not to expose more wire than necessary. — Prepare the Cable
• Follow the color-coded wiring labels on the connector (T568A or T568B standard) to arrange the individual wires. Insert the wires into the corresponding slots on the connector. — Arrange and Insert Wires
• Use a punch-down tool to firmly seat each wire into its slot. Trim any excess wire flush with the connector edge. Ensure all connections are secure. — Terminate the Connector
• Snap the terminated connector into a compatible Leviton QuickPort or standard keystone wall plate. Connect the Ethernet cable to your network device or patch panel. — Install into Wall Plate

Typical situations where Leviton Extreme 6+ QuickPort Connector CAT 6 200 MHz 10 meters (32.8 ft) | TIA/EIA Certified helps — illustrative scenarios, not customer reviews.