Thermalright TF8 5.8g Thermal Paste | 13.8W/m.k High Conductivity

• High performance — Excellent performance comes from its first-class data, thermal conductivity up to 13.8w/m.k, it has a good record of high cooling performance.
• Stability — The available temperature is -220℃/ +380℃, thermal resistance < 0.01, density is 2.9 (25℃). Even in high or low temperature environment, its cooling advantage will not be affected.
• Security — It does not contain any metal particles, oil-free solvents, non conductive, non corrosive, harmless, It is friendly to CPU and GPU and will not damage electronic components.
• Durability — Thermal conductive silicone grease has long service life and low volatility, which can maintain its thermal conductivity in CPU, GPU, radiator module, chipset, sensor and other electronic components for a long time.
• Easy to apply — The needle-type designs is convenient for application and storage. the paste is not stiff and comes with a spatula, the moderate viscosity can be easily applied for a Homogeneous thin layer, so that all beginners can easily apply it.

• Ensure the CPU/GPU die and heatsink contact surfaces are clean and free of old thermal paste or dust. Use isopropyl alcohol for thorough cleaning. — Prepare Surfaces
• Apply a small amount (pea-sized) of Thermalright TF8 to the center of the CPU or GPU die. Do not over-apply; a little goes a long way. — Apply Paste
• Use the included spatula to gently spread the paste into a thin, homogeneous layer across the entire contact surface. Avoid air bubbles. — Spread Evenly
• Carefully place the heatsink onto the CPU/GPU, ensuring proper alignment. Secure the heatsink according to your motherboard or cooler's instructions. — Install Heatsink

Typical situations where Thermalright TF8 5.8g Thermal Paste | 13.8W/m.k High Conductivity helps — illustrative scenarios, not customer reviews.