How to choose a sealant for home repairs in India?

For home repairs in India, choose a sealant based on the surface and climate. Rust-Oleum LeakSeal is ideal for waterproofing gutters, roofs, and masonry against monsoon moisture. Consider its oil-based, flexible rubber formula for instant sealing. Always check the product's recommended surfaces and ensure it's suitable for your specific repair needs.

Is this sealant water-based or solvent-based, and how many coats are needed?

Rust-Oleum LeakSeal is an oil-based formula. It dries to touch in 30 minutes and typically requires one coat for effective sealing, though multiple coats can be applied for added protection. The can covers up to 8 sq. ft. per application.

Can I paint over this rubber coating after application?

Yes, once the Rust-Oleum LeakSeal coating dries to a semi-smooth firm finish, it can be top-coated with latex or oil-based paints. This allows you to match the repaired area to your existing paint scheme.

What are the side effects of using this sealant?

This product is a flammable aerosol and contains Di(2-ethylhexyl) phthalate (DEHP). Ensure adequate ventilation during application and avoid spraying near open flames or heat sources. Keep out of reach of children and avoid prolonged skin contact.

Are sealant products healthy to use indoors?

When used in well-ventilated areas, sealants like Rust-Oleum LeakSeal are generally safe for indoor application on appropriate surfaces. Ensure good airflow during and after application. The product is flammable and contains DEHP, so follow all safety precautions listed on the can.

How to use sealant for effective leak repair?

To use Rust-Oleum LeakSeal for leak repair, ensure the surface is clean, dry, and free of rust or debris. Shake the can well and spray from 10-16 inches away, holding the can upright. Apply a uniform coating to seal the leak or crack. Allow it to dry for 30 minutes before applying additional coats or paint.

Rust-Oleum White Sealant Spray | LeakSeal Flexible Rubber Coating

Name: Rust-Oleum LeakSeal White Flexible Rubber Coating Spray 355ml (12 fl oz) | Waterproof Sealant for Leaks & Cracks
Brand: Rust-Oleum
SKU: zkq0792
Price: 2691.00 INR
Availability: InStock

About this item

Rust-Oleum LeakSeal White Flexible Rubber Coating Spray provides essential waterproof protection for a variety of surfaces including gutters, roofs, flashing, ductwork, PVC, masonry, and concrete. Its advanced rubberized formula is designed to seal leaks and cracks instantly, forming a flexible, water-tight barrier that prevents moisture penetration, rust, and corrosion. This USA-sourced sealant is ideal for fast repairs in hard-to-reach areas.

The oil-based formula dries to the touch in just 30 minutes and offers coverage up to 8 sq. ft. per can. It dries to a semi-smooth firm finish that will not sag or drip, and importantly, can be top-coated with latex or oil-based paints once dry, allowing for seamless integration into existing paint schemes. This ensures a durable, protective seal that maintains its integrity.

For Indian homeowners, this sealant offers a reliable solution for common issues like roof leaks or masonry cracks, especially during monsoon seasons. All customs duties and GST are included in the listed price, with delivery via ExpressBox tracked shipping. 13-15 days

Key Features

Exterior/interior use on gutters, roofs, flashing, ductwork, PVC, masonry, concrete and more
Oil-based formula seals leaks and cracks instantly with a flexible rubber coating
Dries to touch in 30 minutes and covers up to 8 sq. ft.
Prevents water and moisture penetration for ultimate protection
Flat finish can be top-coated with latex or oil based paints
Dries to a semi-smooth firm finish
Coating will not sag or drip
Can be top-coated with latex or alkyd based paints
Great for gutters roofs flashing ductwork pvc drains masonry concrete and more
Can actively build to fill gaps small holes and cracks

Why choose this product

Reliable Waterproofing for Indian Homes

Rust-Oleum LeakSeal offers robust waterproof protection crucial for India's varied climate. Its flexible rubber coating actively seals leaks and cracks in gutters, roofs, and masonry, preventing water damage and corrosion. Unlike some local alternatives that may degrade under extreme heat or humidity, this USA-sourced formula is engineered for durability. It dries quickly and can be painted over, ensuring a lasting, integrated repair solution for your home.

Ideal for DIY Repairs, Not for Structural Sealing

This spray is perfect for quick fixes on non-structural leaks and cracks in common household areas like gutters, flashing, and concrete. It's not designed for large structural gaps or areas requiring high load-bearing capacity. If you need to seal large structural joints or require a sealant for high-pressure water applications, consider specialized industrial-grade products. For general home maintenance, this offers convenience and effective sealing.

How to use

Ensure the area to be sealed is clean, dry, and free from rust, dirt, grease, or loose paint. For best adhesion, lightly sand glossy surfaces and wipe clean. Remove any loose material. — Prepare the Surface
Shake the can vigorously for at least 2 minutes after the mixing ball begins to rattle. Hold the can upright, 10-16 inches from the surface. Spray in a steady back-and-forth motion, overlapping each stroke. — Shake and Spray
Apply thin, even coats. Allow 30 minutes to dry to touch between coats. For optimal protection, apply multiple coats until desired coverage and seal are achieved. Do not apply in temperatures below 50°F (10°C) or in direct sunlight. — Apply Multiple Coats
Allow the final coat to dry for at least 24 hours before painting. The coating can be top-coated with latex or oil-based paints. Ensure good ventilation during application and drying. — Top-Coat and Cure

Example scenarios

Typical situations where Rust-Oleum LeakSeal White Flexible Rubber Coating Spray 355ml (12 fl oz) | Waterproof Sealant for Leaks & Cracks helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

A homeowner in Chennai notices a small leak in their roof flashing during the monsoon season.

How this product helps

Using Rust-Oleum LeakSeal spray allows for quick, targeted application to the affected flashing area. The flexible rubber coating seals the leak instantly, preventing further water damage to the ceiling and interior. Its fast-drying nature means minimal disruption, and it can be painted over to match the roof's appearance.

Scenario 2

Illustrative example

Where it helps

A DIY enthusiast in Delhi needs to seal cracks in a concrete patio before the rainy season.

How this product helps

Rust-Oleum LeakSeal spray is applied to the concrete cracks, filling them with a flexible, waterproof barrier. It dries quickly and can be painted over, providing a durable seal against water penetration and preventing freeze-thaw damage in colder months. This offers a convenient solution for maintaining outdoor structures.

Specifications & installation

Specifications

Base Type	Oil-based
Key Feature	Flexible rubber coating
Water Resistance	Waterproof
Top-Coating	Can be top-coated with latex or alkyd based paints
Prop 65 Chemicals	Di(2-ethylhexyl) phthalate (DEHP)

Installation & usage

Application	Spray
Recommended Surfaces	Gutters, roofs, flashing, ductwork, PVC, masonry, concrete, drains
Interior/Exterior Use	Yes
Cost per use	Covers up to 8 sq. ft. at ₹2,691 — ₹336 per sq_ft
Shelf life after opening	12 months (typical for sealants)
Contraindications	Not for structural gaps or high-pressure water applications. Flammable aerosol.
Allergens / common irritants	Contains Di(2-ethylhexyl) phthalate (DEHP)

How we compare

Feature	Rust-Oleum LeakSeal White	Others
Waterproofing	Flexible rubber coating, waterproof, prevents moisture penetration.	Varies by brand; some offer basic water resistance, others full waterproofing at higher price points.
Application	Easy spray-on application, dries to touch in 30 mins, covers up to 8 sq. ft.	Often brush-on or cartridge-based; drying times and coverage vary significantly by product.
Finish & Top-Coating	Flat, semi-smooth finish; can be top-coated with latex/oil paints.	Finish and paintability differ; some dry glossy, others matte, and not all are easily top-coated.
Cost per sq. ft.	Covers up to 8 sq. ft. at ₹2,691 — ₹336 per sq_ft	Local sealants range from ₹150-₹500 for similar coverage, depending on brand and type.
Surface Compatibility	Gutters, roofs, flashing, ductwork, PVC, masonry, concrete.

SKU	zkq0792
GTIN	00020066224073
Brand	Rust-Oleum
Product Name	LeakSeal Flexible Rubber Coating Spray
Color	White
Item Form	Spray
Material	Rubber Sealant
Size	355 ml (12 fl oz)
Weight	340 g (0.75 lb)
Dimensions	6.1 cm x 6.1 cm x 19.9 cm (2.4 in x 2.4 in x 7.8 in)
Coverage	Up to 8 sq. ft.
Drying Time	Dries to touch in 30 minutes
Finish	Flat, semi-smooth firm finish
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current Rust-Oleum LeakSeal White Flexible Rubber Coating Spray 355ml (12 fl oz) \| Waterproof Sealant for Leaks & CracksBuy Now	Flex Paste Waterproof Paintable Sealant 255ml (9 oz) \| Fills Gaps Cracks Holes - Blocks Water Air - UV ResistantBuy Now	Flex Paste Waterproof Sealant Cartridge 255g (9 oz) \| Blocks Water & Air, Paintable Rubberized BarrierBuy Now	Miracle Sealants 511 Anti-Slip Treatment 946ml (32 Fl Oz) \| Penetrating Sealer for Tile, Stone & ConcreteBuy Now	Rust-Oleum LeakSeal Flexible Rubber Coating Spray, 312 ml (11 fl oz) \| Waterproof Sealant for Gutters, Roofs, MasonryBuy Now	Weller ETP-5 Soldering Tip Set \| 5 PCS Conical 0.8mm (0.031")Buy Now	AWSENS Upgraded 3 Head LED Security Light with Motion Sensor 3800LM 40W 5000K \| BronzeBuy Now
Spec
Price

Rust-Oleum LeakSeal White Flexible Rubber Coating Spray 355ml (12 fl oz) | Waterproof Sealant for Leaks & Cracks

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported