SPTA Yellow T80 Medium Cut Foam Polishing Pad 6.5 Inch (165mm) Face for 6 Inch (150mm) Backing Plate | 3Pcs High-Cut Abrasive for Compounding, Polishing, Waxing

• T80 High-Cut Foam Polishing Pad — T80 Yellow High-Cut Foam Pad Is Intensive Cutting Swirl-Free Polishing Pad, It's Remove 1500/2000# Sanding Disc Marks, Swirl Marks & Heavy / Medium Oxidation, Can Work With SPTA Heavy Cut Polishing Compound And Medium Cut Polishing Compoun. Ideal For RO, DA And GA Car Polisher.
• Innovative design — The groove can store excess polishing paste and abrasives; at the same time, it speeds up the air circulation between the paint and the polishing pad and avoids the accumulation of heat.
• High-quality sponge — Using high-density polyurethane sponge, good ventilation performance, uniform elasticity, soft hand feel and easy to bend. Uniform pores, high air permeability and high tensile strength extend the service life of the polishing pad.
• Easy to use — The use of high-quality Velcro, easy to replace, improve work efficiency, and strong air permeability. Therefore, working heat can be radiated from the buckle to avoid adhesion failure due to heat accumulation on the back.
• Standard size — The diameter of the sponge is 6.5 inches, and the bottom Velcro fasteners can prevent scratching and scorching of the sponge surface during the polishing process, reducing the wear and fasteners between the sponges, and improving product reliability.
• Multi-Purpose Functionality — Perfect for removing scratches, oxidation, swirl marks, and sun damage, as well as waxing and finishing. Suitable for cars, boats, glass, and other surfaces, these pads are versatile for both professional and DIY use.
• Precautions — In the course of use, when there is too much abrasive accumulation, the polishing disc should be cleaned in time; the polishing disc should be cleaned in time after use, and do not use solvents or alkaline cleaners when cleaning the polishing disc.
• Buy With Confidence — Thank you for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions, please do not hesitate to contact us, we will provide the best service as we can.

• Prepare the Pad and Polisher — Ensure your backing plate is 6 inches (150mm). Attach the 6.5-inch SPTA Yellow T80 pad securely to the backing plate using the Velcro. Apply a small amount of SPTA Heavy Cut or Medium Cut Polishing Compound onto the pad's surface.
• Apply Compound and Polish — Spread the compound evenly over the working area. Begin polishing at a low speed, gradually increasing to a medium speed. Use moderate pressure and overlapping strokes, working in small sections (e.g., 2x2 feet) to ensure even coverage and prevent overheating.
• Clean and Inspect Pad — After polishing each section, clean the pad to remove excess compound and paint residue. Gently rinse with water and squeeze out moisture, avoiding harsh cleaners. Inspect the pad for wear and replace if necessary to maintain optimal cutting performance and prevent scratching.

Typical situations where SPTA Yellow T80 Medium Cut Foam Polishing Pad 6.5 Inch (165mm) Face for 6 Inch (150mm) Backing Plate | 3Pcs High-Cut Abrasive for Compounding helps — illustrative scenarios, not customer reviews.