SPTA Blue T60 Moderate-Cut Foam Polishing Pads 16.5cm (6.5 Inch) | Remove Sanding Marks & Oxidation

• Blue T60 Moderate-Cut Foam Polishing Pads — T60 Blue Moderate-Cut Foam Pad Can Remove 1500/2000# Sanding Disc Marks & Medium Oxidation, It's Can Work With SPTA Heavy Cut Polishing Compound And Medium Cut Polishing Compound, Ideal For RO,DA And GA Car polisher.
• Innovative design — The groove can store excess polishing paste and abrasives; at the same time, it speeds up the air circulation between the paint and the polishing pad and avoids the accumulation of heat.
• High-quality sponge — Using high-density polyurethane sponge, good ventilation performance, uniform elasticity, soft hand feel and easy to bend. Uniform pores, high air permeability and high tensile strength extend the service life of the polishing pad.
• Easy to use — The use of high-quality Velcro, easy to replace, improve work efficiency, and strong air permeability. Therefore, working heat can be radiated from the buckle to avoid adhesion failure due to heat accumulation on the back.
• Standard size — The diameter of the sponge is 6.5 inches, and the bottom Velcro fasteners can prevent scratching and scorching of the sponge surface during the polishing process, reducing the wear and fasteners between the sponges, and improving product reliability.
• Multi-Purpose Functionality — Perfect for removing scratches, oxidation, swirl marks, and sun damage, as well as waxing and finishing. Suitable for cars, boats, glass, and other surfaces, these pads are versatile for both professional and DIY use.
• Precautions — In the course of use, when there is too much abrasive accumulation, the polishing disc should be cleaned in time; the polishing disc should be cleaned in time after use, and do not use solvents or alkaline cleaners when cleaning the polishing disc.
• Buy With Confidence — Thank you for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions, please do not hesitate to contact us, we will provide the best service as we can.

• Prepare the Pad and Polisher — Ensure the backing plate of your car polisher is clean. Attach the SPTA Blue T60 foam pad securely to the backing plate using the high-quality Velcro. Apply a small amount of polishing compound to the pad's surface.
• Apply Compound and Polish — Spread the polishing compound evenly across the surface to be worked. Begin polishing at a low speed, gradually increasing as needed. Move the polisher in controlled, overlapping passes to ensure even coverage and compound distribution.
• Clean and Inspect — After polishing a section, inspect the results. Clean the pad promptly if abrasive accumulation occurs. Wipe away excess compound residue with a clean microfiber towel. Repeat steps 1-3 for remaining sections.
• Pad Maintenance — After use, clean the polishing disc thoroughly using appropriate methods, avoiding solvents or alkaline cleaners. Store the pads in a clean, dry place to maintain their performance for future use.

Typical situations where SPTA Blue T60 Moderate-Cut Foam Polishing Pads 16.5cm (6.5 Inch) | Remove Sanding Marks & Oxidation helps — illustrative scenarios, not customer reviews.