SPTA Orange Medium-Cut Foam Polishing Pads 6.5 Inch (165mm) Face for 6 Inch (150mm) Backing Plate | 3-Piece Set for Compounding, Polishing, Waxing

• T40 Orange Medium-Cut Polishing Pad — T40 Orange Medium-Cut Foam Pad is Light Cutting Pad, It's Can Remove 2000# Sanding Disc Marks, Fine Scratches & Light Oxidation, It's Can Work With SPTA Medium Cut Polishing Compound ,Ideal For Rotary And DA Car Polisher.
• Innovative design — The groove can store excess polishing paste and abrasives; at the same time, it speeds up the air circulation between the paint and the polishing pad and avoids the accumulation of heat.
• High-quality sponge — Using high-density polyurethane sponge, good ventilation performance, uniform elasticity, soft hand feel and easy to bend. Uniform pores, high air permeability and high tensile strength extend the service life of the polishing pad.
• Easy to use — The use of high-quality Velcro, easy to replace, improve work efficiency, and strong air permeability. Therefore, working heat can be radiated from the buckle to avoid adhesion failure due to heat accumulation on the back.
• Standard size — The diameter of the sponge is 6.5 inches, and the bottom Velcro fasteners can prevent scratching and scorching of the sponge surface during the polishing process, reducing the wear and fasteners between the sponges, and improving product reliability.
• Multi-Purpose Functionality — Perfect for removing scratches, oxidation, swirl marks, and sun damage, as well as waxing and finishing. Suitable for cars, boats, glass, and other surfaces, these pads are versatile for both professional and DIY use.
• Precautions — In the course of use, when there is too much abrasive accumulation, the polishing disc should be cleaned in time; the polishing disc should be cleaned in time after use, and do not use solvents or alkaline cleaners when cleaning the polishing disc.
• Buy With Confidence — Thank you for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions, please do not hesitate to contact us, we will provide the best service as we can.

• Prepare the Pad and Polisher — Ensure your backing plate is 6 inches. Attach the 6.5-inch SPTA Orange Medium-Cut Foam Pad securely to the backing plate. Apply a small amount of SPTA medium-cut polishing compound directly onto the pad's surface.
• Apply Compound and Polish — Spread the compound evenly over a small section of the paint surface. Start the polisher at a low speed to distribute the compound, then increase to a moderate speed (e.g., 1000-1500 RPM for rotary, 4-5 for DA). Work in overlapping passes.
• Clean and Inspect — After polishing a section, clean the pad to remove excess compound and residue. Inspect the paint for desired results. Repeat the process on adjacent sections until the entire area is covered. Do not use solvents for cleaning.

Typical situations where SPTA Orange Medium-Cut Foam Polishing Pads 6.5 Inch (165mm) Face for 6 Inch (150mm) Backing Plate | 3-Piece Set for Compounding helps — illustrative scenarios, not customer reviews.