uxcell AXK1226 Thrust Needle Roller Bearings with Washers 12mm Bore 26mm OD 2mm Width 10pcs | High Stiffness in Minimum Axial Space

• MODLE — Bearing Model: AXK1226 (I.D.=12mm, O.D.=26mm, Thickness=2mm); Washer Model: AS1226
• MATERIAL — Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• FEATURES — Needle Roller Thrust Bearings can accommodate axial loads in one direction only
• WASHER — Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
• CAPABILITY — 28.6kN Static Load Capacity, 9.86kN Dynamic Load Capacity, 13000RPM Maximum Rotational Speed

• Prepare the Shaft and Housing — Ensure the machine shaft is precision-ground, polished, and induction-hardened to at least 58–64 HRC if running directly on the shaft. Alternatively, ensure the housing is prepared to accept the bearing and washers.
• Install Bearings and Washers — Place one hardened spring steel washer (AS1226) on each side of the bearing (AXK1226). If using the shaft as a raceway, ensure the shaft is correctly positioned. If using housing raceways, ensure they are clean and prepared.
• Mount the Bearing Assembly — Carefully press the bearing and washer assembly into the designated housing or onto the shaft. Ensure proper alignment to prevent binding. Apply a suitable oil lubricant before initial operation for speeds up to 13000 RPM.
• Verify Operation and Lubrication — Check for smooth rotation under load. For continuous operation, maintain adequate oil lubrication. In dusty or humid Indian conditions, adhere to a strict relubrication schedule to prevent wear and ensure bearing longevity.

Typical situations where uxcell AXK1226 Thrust Needle Roller Bearings with Washers 12mm Bore 26mm OD 2mm Width 10pcs | High Stiffness in Minimum Axial Space helps — illustrative scenarios, not customer reviews.