uxcell AXK0819 Thrust Needle Roller Bearings with Washers 8mm Bore 19mm OD 2mm Width 10pcs | High-Quality Industrial Components

• MODLE — Bearing Model: AXK0819 (I.D.=8mm, O.D.=19mm, Thickness=2mm); Washer Model: AS0819
• MATERIAL — Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• FEATURES — Needle Roller Thrust Bearings can accommodate axial loads in one direction only
• WASHER — Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
• CAPABILITY — 17.2kN Static Load Capacity, 7.25kN Dynamic Load Capacity, 15500RPM Maximum Rotational Speed

• Prepare Shaft and Housing — Ensure the machine shaft is precision-ground and hardened to at least 58–64 HRC, or that the housing surfaces intended for the washers are clean and smooth. Verify shaft diameter is 8mm.
• Install Bearings and Washers — Place the bearing and washer assemblies onto the shaft. If using the shaft as a raceway, ensure the bearing rollers contact the hardened shaft surface directly. If using washers, position them against the shaft or housing surfaces.
• Apply Lubrication — Apply a suitable lubricant, preferably oil, to the bearing surfaces before assembly and during operation. Proper lubrication is crucial for achieving the 15500 RPM limiting speed and ensuring longevity.
• Mount Adjacent Components — Assemble the surrounding components, ensuring they do not interfere with the bearing's axial load capacity or rotation. Verify that the bearing is correctly seated and can move freely under load.

Typical situations where uxcell AXK0819 Thrust Needle Roller Bearings with Washers 8mm Bore 19mm OD 2mm Width 10pcs | High-Quality Industrial Components helps — illustrative scenarios, not customer reviews.