ScotchBlue Original Multi-Surface Painter’s Tape 0.94 inch (24mm) x 60 Yard Rolls (24-Pack) | Clean Release for Walls, Trim, Glass

• 1 case of 24 Packs, 24 Count Total
• READY. SET. TAPE!: 1 roll of 1.41 inches x 60 yards tan Scotch General Purpose Masking Tape, a versatile solution for painting, labeling, bundling and general masking applications on non-damageable surfaces with a 3-inch core
• DAMAGE-FREE ADHESIVE: Scotch Brand Masking Tape can stay on for up to five days on interior surfaces and one day on exterior surfaces, and it removes easily without leaving a sticky residue behind
• CONQUER MOST SURFACES: Masking tape that's designed for use on painted walls, vinyl, carpet, metal and plastic
• TACKLE INDOORS AND OUTDOORS: Resists UV rays, sunlight and moisture so you can use it as an indoor or outdoor tape
• SUSTAINABILITY: Solvent-free paint tape made from 45% renewable resources with a core made from 70% post-consumer waste
• HOW TO USE: Let the firmly applied tape set for 30 to 60 minutes before starting to paint, and when paint is dry to the touch, lift tape up slowly to remove at a 45-degree angle
• EASY REMOVAL: Lift ScotchBlue Painter’s Tape up slowly and pull it back on itself, then remove the tape at a 45-degree angle
• No. 1 TRUSTED: ScotchBlue is the No. 1 trusted brand for tape by professional painters (Based on 2020 TNS Kantar U.S. Brand Health Survey)
• EASY REMOVAL: Lift the tape up slowly and pull it back on itself, then remove the tape at a 45-degree angle
• SUSTAINABILITY: Made from 50% renewable resources; Adhesive made with natural rubber; Tape made in a site certified for energy management (ISO 50001 certified); Core made with 70% post-consumer waste

• Prepare the Surface — Ensure the surface to be taped (wall, trim, glass) is clean, dry, and free of dust or debris. For freshly painted surfaces, wait at least 24 hours after painting before applying the tape.
• Apply the Tape Firmly — Apply the ScotchBlue tape smoothly and firmly along the edge you wish to mask. Press down along the entire length to ensure good adhesion and create a seal against paint bleed.
• Allow Tape to Set — Let the firmly applied tape set for at least 30 to 60 minutes before you begin painting. This allows the adhesive to bond properly and prepare for a clean paint line.
• Remove Tape Carefully — Once the paint is dry to the touch, lift the tape slowly at a 45-degree angle. Pull it back on itself to ensure a clean removal without lifting the paint or leaving residue.

Typical situations where ScotchBlue Original Multi-Surface Painter’s Tape 0.94 inch (24mm) x 60 Yard Rolls (24-Pack) | Clean Release for Walls helps — illustrative scenarios, not customer reviews.