Is this Permatex thread sealant safe to use near engine sensors and electronics?

This Permatex High Performance Thread Sealant is designed for metal and tapered pipe threads and is not explicitly labeled as sensor-safe. While it offers a rapid cure, it's best to use dedicated sensor-safe or low-volatility (oxime/neutral cure) sealants when working directly around oxygen sensors or sensitive electronic components to avoid potential corrosion or interference.

What temperature can this automotive silicone withstand?

This high-performance thread sealant withstands extreme temperatures ranging from -60°F to 300°F (-51°C to 149°C). This makes it suitable for applications in hot engine bays and near exhaust components where temperature fluctuations are common.

How to choose the right sealant for automotive applications?

Consider the application's pressure and temperature requirements, as well as the materials being sealed. For metal, tapered threads needing high pressure and temperature resistance, Permatex High Performance Thread Sealant is ideal. For sensitive electronics, opt for sensor-safe formulations. Always check the product's specifications against your specific needs.

How to use Permatex High Performance Thread Sealant?

Ensure the metal and tapered pipe threads are clean and dry. Apply the sealant evenly to the threads. Assemble the fitting and allow the sealant to cure fully before exposing it to pressure or fluids. The rapid cure allows for handling up to 10,000 PSI after curing.

What is the best sealant for high-pressure automotive connections?

For high-pressure automotive connections on metal and tapered pipe threads, Permatex High Performance Thread Sealant is an excellent choice. It seals up to 1000 PSI and rapidly cures to handle 10,000 PSI, offering superior leak prevention and durability.

Can I use this sealant for daily automotive maintenance?

Yes, this sealant is suitable for daily automotive maintenance tasks involving metal and tapered pipe threads that require a strong, leak-proof seal. Its ability to withstand high pressures and temperatures makes it reliable for regular use on oil lines, fuel fittings, and coolant systems.

What are the side effects of using this thread sealant?

The primary 'side effect' is a strong, permanent seal. Ensure proper application as it can be difficult to disassemble once fully cured. Always use in a well-ventilated area during application and cure. It's designed for automotive use and is not intended for food-grade or medical applications.

What are the benefits of using Permatex thread sealant?

The benefits include superior sealing power, a strong thread-locking hold, resistance to high pressures (up to 10,000 PSI) and extreme temperatures (-60°F to 300°F), and protection against leaks, corrosion, and galling. It offers a cleaner, faster alternative to tape and pipe dope.

Permatex High Performance Thread Sealant 50ml (6-Pack)

Name: Permatex High Performance Thread Sealant 50ml (6-Pack) | Seals up to 1000 PSI, Resists 300°F
Brand: Permatex
SKU: tsa7895
Price: 12142.00 INR
Availability: InStock

About this item

Permatex High Performance Thread Sealant provides unmatched sealing power combined with the strength of a blue thread locker. This sealant creates an airtight, watertight hold that prevents leaks, loosening, and corrosion, even under extreme pressures and temperatures. It seals connections up to 1,000 PSI, with a rapid cure capable of withstanding 10,000 PSI, ensuring leak-proof reliability for your toughest automotive jobs.

Designed for metal and tapered pipe thread fittings, this sealant protects against galling, rust, and corrosion. It withstands extreme temperatures from -60°F to 300°F, making it ideal for stainless steel fittings, oil PSI sending units, oil and coolant lines, fuel fittings, and more. This high-performance thread sealant offers a faster, cleaner application than traditional pipe tape and dope.

Imported directly for the Indian market, this Permatex sealant ensures your metal connections remain locked and secure without the risk of leaks. It's a must-have for professional mechanics and DIY enthusiasts seeking lasting, high-strength results for critical automotive applications.

Key Features

Unbeatable Seal & Hold: Combines the sealing power of thread sealant with the firm hold of a blue thread locker, ensuring connections stay tight and leak-free even under pressure.
High-Pressure, No-Leak Assurance: Delivers an airtight, watertight seal up to 1000 PSI, locking fittings securely against leaks in the toughest conditions.
Temperature Resistant & Durable: Withstands extreme temperatures from -60°F to 300°F, protecting threads from rust, corrosion, and wear.
Fast-Curing Strength: Rapidly cures to handle up to 10,000 PSI, making it perfect for heavy-duty applications like stainless steel fittings, oil lines, and fuel systems.
No More Tape or Pipe Dope Needed: Replaces messy alternatives with a smooth, reliable sealant that’s designed for metal, tapered pipe thread fittings—ideal for professional and DIY projects alike.

Why choose this product

Superior Sealing & Locking Power

Permatex High Performance Thread Sealant is engineered for ultimate reliability. It combines robust sealing capabilities with the strength of a blue thread locker, preventing leaks and loosening even in high-vibration environments. This formula is designed to withstand extreme pressures up to 10,000 PSI after curing and temperatures from -60°F to 300°F. It offers superior protection against galling, rust, and corrosion on metal and tapered pipe threads, including stainless steel. Imported directly, it ensures your automotive connections are secure and leak-free, outperforming traditional methods.

Who It's For & Who Should Skip

This sealant is ideal for automotive professionals and DIY enthusiasts working on engines, fuel systems, cooling lines, and exhaust components. It's perfect for sealing metal, tapered pipe threads, and stainless steel fittings where high pressure, temperature resistance, and a strong hold are critical. Skip this product if you require a sealant for non-metal or non-tapered threads, or if your application involves temperatures outside the -60°F to 300°F range. For non-automotive or low-pressure applications, simpler sealants may suffice.

How to use

Ensure all metal and tapered pipe threads are clean, dry, and free from old sealant, oil, or debris. Proper surface preparation is crucial for optimal adhesion and sealing. — Prepare Threads
Apply the Permatex High Performance Thread Sealant evenly to the male threads, starting from the first thread and working towards the fitting. Avoid over-application; a consistent layer is sufficient. — Apply Sealant
Assemble the fitting hand-tight, then tighten further as required by the application. Allow the sealant to cure fully before exposing it to pressure or fluids. Rapid cure allows handling up to 10,000 PSI. — Assemble and Cure

Example scenarios

Typical situations where Permatex High Performance Thread Sealant 50ml (6-Pack) | Seals up to 1000 PSI helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Mechanic in Delhi needing to seal a high-pressure fuel line on a performance car.

How this product helps

This Permatex sealant withstands 1000 PSI and rapid cures to 10,000 PSI, ensuring a leak-free seal even with engine vibrations and heat. Its resistance to fuel and high temperatures prevents failures common with lesser sealants.

Scenario 2

Illustrative example

Where it helps

DIY enthusiast in Mumbai replacing a worn gasket on a motorcycle's oil sump.

How this product helps

The sealant's ability to resist oil and temperatures up to 300°F (-60°F to 149°C) makes it perfect for oil-tight seals. It replaces messy tape and dope for a cleaner, faster application, ensuring a reliable gasket seal.

Specifications & installation

Specifications

Cure Type	Rapid Cure (Handles up to 10,000 PSI)
Temperature Resistance	-60°F to 300°F (-51°C to 149°C)
Pressure Resistance	Seals up to 1000 PSI; Rapid cure handles 10,000 PSI
Key Feature	Combines thread sealant with blue thread locker

Installation & usage

Application	Metal and tapered pipe thread fittings
Recommended Use	Stainless steel fittings, oil PSI sending units, oil and coolant lines, fuel fittings, rear axle fill plugs
Directions	Apply to threads before assembly. Ensure threads are clean and dry. Allow to cure fully before exposing to pressure or fluids.
Shelf life after opening	12 months (Category default for sealants)
Cost per use	50 ml tube at ~1 ml/application = ~50 applications: ₹243 per application

How we compare

Feature	Permatex High Performance	Others
Sealing Strength	Seals up to 1000 PSI, rapid cure to 10,000 PSI	Local automotive sealants typically seal up to 500-800 PSI, with slower cure times.
Temperature Resistance	-60°F to 300°F (-51°C to 149°C)	Common local sealants range from -40°C to 120°C, with higher-temp variants available at higher cost.
Thread Locking	Includes blue thread locker for firm hold	Most local sealants focus on sealing only; thread locking requires a separate product.
Corrosion & Galling Protection	Protects against rust, corrosion, and galling	Offers basic corrosion protection; galling resistance varies by brand.
Cost per 50ml tube	50 ml tube — ₹243 per ml	Local 50ml tubes typically range from ₹300-₹600.

SKU	tsa7895
GTIN	0686226565211
Brand	Permatex
Part Number	56521-6PK
Model Name	Permatex
Item Form	Liquid
Color	High Performance Thread Sealant
Material	Alloy Steel (Note: This likely refers to the applicator or packaging, not the sealant itself)
Size	50 ml (Pack of 6) \| 10.14 fl oz total
Dimensions (Pack)	21.4 cm x 23.7 cm x 11.4 cm (8.4 in x 9.3 in x 4.5 in)
Weight (Pack)	0.65 kg (1.43 lb)
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current Permatex High Performance Thread Sealant 50ml (6-Pack) \| Seals up to 1000 PSI, Resists 300°FBuy Now	Loctite 545 Pneumatic/Hydraulic Thread Sealant 36ml (1.21 Fl Oz) \| Seals High-Pressure SystemsBuy Now	Permatex High Temperature Thread Sealant 50ml (156ml Total) \| Resists Leakage & VibrationBuy Now	ProCase NRR 28dB Passive Noise Reduction Earmuffs \| Adjustable Metal Frame, Foldable Design, PinkBuy Now	Bentgo Salad Container, Lunch Bowl with 4-Compartment Toppings Tray, 1.9 L (54 oz) \| Leak-Proof Dressing Container, Reusable Fork, BPA-Free, Microwave & Dishwasher SafeBuy Now	JoyBros TriCut Replacement Brush for Dreame L40 Ultra Gen 2 X40 Ultra \| Fits L20 L30 X30 D30 D10 Plus Gen2, L10s Ultra Pro Ultra C20 Plus D9 Max Gen2, MOVA P10 P50 Pro Ultra E40 Ultra Robotic Vacuum CleanersBuy Now	STA-BIL Storage Fuel Stabilizer 4 oz (118 ml) Bottles — 24-Pack \| Keeps Fuel Fresh for 2 YearsBuy Now
Spec
Price

Permatex High Performance Thread Sealant 50ml (6-Pack) | Seals up to 1000 PSI, Resists 300°F

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported