Jacquard Permanent Water-Based Resist Gold 66.54 ml (2.25 Fl Oz) | Crisp Lines for Screen Printing

• These metallic resists hold fine, crisp lines that do not spread.
• The consistency is perfect for production screen printing, brushing or squeeze-bottle application.
• Permanent Water-based Resists are non-toxic, odorless and completely washfast after heat setting.
• Comes in 2 Sizes: 2.25 Oz / 66.54 ml & 8 Oz / .24 L
• Available in 8 Colors; #881 Black, #882 Gold, #883 Silver, #884 Copper, #885 Antique Gold, #886 Red Gold, #887 Bronze, #888 Russet

• Ensure your fabric or surface is clean, dry, and free of any finishes that might interfere with adhesion. For fabrics, pre-wash to remove sizing agents. — Prepare Your Surface
• Using a squeeze bottle, brush, or screen printing setup, apply the Jacquard Permanent Water-Based Resist precisely where you want to maintain the original surface color or texture. Work with steady, controlled movements to achieve crisp lines. — Apply the Resist
• Once the resist is dry to the touch, heat set it according to the fabric manufacturer's instructions. This typically involves ironing or using a heat press to make the resist completely washfast. — Heat Set for Permanence
• After heat setting, apply your desired paint or dye over the resist-covered areas. The resist will protect these areas, allowing you to create layered effects or defined patterns. — Apply Paint or Dye

Typical situations where Jacquard Permanent Water-Based Resist Gold 66.54 ml (2.25 Fl Oz) | Crisp Lines for Screen Printing helps — illustrative scenarios, not customer reviews.