Jacquard Permanent Water-Based Resist Black 66.54ml (2.25 Fl Oz) | For Silk Screening & Fine Lines

• These metallic resists hold fine, crisp lines that do not spread.
• The consistency is perfect for production screen printing, brushing or squeeze-bottle application.
• Permanent Water-based Resists are non-toxic, odorless and completely washfast after heat setting.
• Comes in 2 Sizes: 2.25 Oz / 66.54 ml & 8 Oz / .24 L
• Available in 8 Colors; #881 Black, #882 Gold, #883 Silver, #884 Copper, #885 Antique Gold, #886 Red Gold, #887 Bronze, #888 Russet

• Using a squeeze bottle, brush, or screen printing method, apply the Jacquard Permanent Water-Based Resist to your fabric (silk, cotton, paper) in the desired pattern. Ensure lines are crisp and continuous. — Apply Resist to Fabric
• Let the resist dry thoroughly on the fabric. This typically takes about 24 hours. Ensure the resist is fully dry before proceeding to the next step to prevent bleeding. — Allow to Dry Completely
• Once dry, heat set the resist according to fabric recommendations. This usually involves ironing or using a heat press for a specific duration (check manufacturer guidelines) to make it permanent. — Heat Set the Resist
• Apply your chosen fabric dye. After dyeing and rinsing, the resist will wash away, revealing your crisp, protected design. The design is now washfast. — Apply Dye and Wash

Typical situations where Jacquard Permanent Water-Based Resist Black 66.54ml (2.25 Fl Oz) | For Silk Screening & Fine Lines helps — illustrative scenarios, not customer reviews.