RETUXEP Dual Textured PEI Build Plate 257x257mm | For Bambu Lab X1/P1/A1 Series 3D Printers

• Double Sided Textured Printing — The product is flexible spring steel plate with double sided textured PEI coating. The dual sided PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
• Flexible and Easy to Remove — The PEI spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or you can bend the build plate after the PEI plate cooled and remove the prints. The print mat won’t be out of shape.
• Good Adhesion — The model can be firmly attached to the surface of the print bed. Please clean the plate with soap or alchol before each print. Remeber let the build plate cool down before remove the model to avoid damaging the coating.
• Compatible Filaments — PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
• Compatible 3D Printers — The double-sided textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.

• Prepare the Build Plate — Ensure the build plate is clean by wiping it with isopropyl alcohol or mild soap and water. Allow it to dry completely before placing it on your 3D printer's magnetic base.
• Start Your Print — Load your filament and start your 3D print. Ensure your printer's bed leveling and Z-offset are correctly calibrated for optimal first-layer adhesion to the textured PEI surface.
• Remove the Print — After the print is finished and the build plate has cooled down, gently flex the spring steel plate. This should release the printed object easily. If needed, carefully remove by hand.

Typical situations where RETUXEP Dual Textured PEI Build Plate 257x257mm | For Bambu Lab X1/P1/A1 Series 3D Printers helps — illustrative scenarios, not customer reviews.