What material is best for car weather stripping in a hot, rainy climate like India?

EPDM rubber weather stripping, like this Turcee T-Car seal, performs exceptionally well in India's hot and humid conditions. It offers superior resistance to UV rays, heat, and moisture, ensuring a durable seal against monsoon rains and dust. While foam or silicone options exist, EPDM provides better longevity and performance in extreme climates. Ensure proper installation temperature for optimal adhesion.

How do I know how much weather stripping to buy for my car?

Measure the total perimeter of the areas you intend to seal, such as the sunroof, windshield, or tailgate, and add a small margin for corners. This roll provides 5 meters (16.4 feet) of weather stripping. For example, a small sunroof might use 3 meters, while both sides of the windshield could require 2 meters each. Always measure your specific gaps before purchasing to ensure compatibility and sufficient length.

Is this Turcee T-Car Weather Strip safe to use on my car?

Yes, this weather strip is designed for automotive use to seal gaps and improve your car's protection. It helps prevent dust, water leaks, and wind noise. The EPDM rubber material is durable and the adhesive is strong. However, it's important to note that after installation, the sunroof may not be operable again. Always follow installation guidelines for best results.

Can I use this weather stripping in extremely cold or hot Indian weather?

The effective temperature range for optimal adhesiveness is between 50°F - 85°F (10°C - 29°C). For temperatures below 45°F (7°C), preheating the strip or using an additional 3M sealing strip adhesive is recommended. While EPDM is heat-resistant, extremely high ambient temperatures during installation might affect initial adhesion; ensure the surface is clean and cool.

How to install the Turcee T-Car Weather Strip?

Thoroughly clean the installation surface and ensure it's dry. The ideal installation temperature is between 50°F - 85°F. If it's cold, preheat the strip indoors. For a tight joint and waterproofing, cut the end at a 45° angle. Wipe the surface with the provided adhesive-promoting wipe, then press firmly for 30 seconds after application. Avoid using the sunroof after installation.

Will this weather stripping reduce road noise in my car?

Yes, by sealing gaps around the windshield, sunroof, and tailgate, this weather stripping helps to reduce wind noise that enters the cabin at higher speeds. This contributes to a quieter and more comfortable driving experience, especially on highways. The EPDM rubber material also provides some sound dampening properties.

How to buy an original Turcee T-Car Weather Strip in India?

Purchase directly from crowcrowcrow.com to ensure you receive an original Turcee T-Car Weather Strip. We import exclusively from authorized US retailers and brand partners, ensuring factory-sealed products. All customs duties and GST are included in the listed INR price, and your order is shipped via ExpressBox with tracking for reliable delivery across India.

Turcee T-Car Weather Strip 5m (16Ft) | EPDM Rubber Seal for Windshield & Sunroof

Name: Turcee T-Car Weather Strip Seal 5m (16Ft) | Seals Gaps, Reduces Noise & Dust
Brand: Turcee
SKU: sxg2859
Price: 1852.00 INR
Availability: InStock

About this item

The Turcee T-Car Weather Strip Seal, a 5-meter (16-foot) roll of EPDM rubber with powerful adhesive, is engineered to seal gaps in your vehicle's sunroof, windshield, and tailgate. This upgraded T-type strip effectively prevents dust ingress, water leaks, high-speed wind noise, and dirt accumulation, creating a more comfortable driving environment. Its flexible nature allows for a snug fit, providing hidden protection that blends with your car's design. The seal is washable and reusable, maintaining its integrity over time.

Installation is straightforward on clean surfaces within a temperature range of 50°F - 85°F. The strip can be cut to size for various applications, such as small sunroofs (3M), panoramic sunroofs (7M), or windshield sides (2M each). For optimal adhesion in cooler temperatures, preheating the strip or using a 3M sealing strip adhesive is recommended. The thin profile (3mm) ensures it doesn't cause bulging, making it a discreet yet effective solution for improving your car's interior comfort and protection against the elements.

This universal fit weather stripping offers a practical solution for enhancing your vehicle's seals. While it provides a robust barrier against common issues like dust and water, it's important to note that the sunroof may not be operable after installation. For Indian conditions, the EPDM material offers good resistance to heat and humidity. Ensure proper surface preparation and temperature conditions for optimal adhesion, especially in varying Indian climates.

Key Features

Upgrade T-Car Weather Strip: Don't put up with the large gap between the front windshield and sunroof causing leakage into dust and the terrible wind noise on the highway! The upgraded T-seal strip can perfectly fill the gap between the front windshield,rear windshield, sunroof and frame
Easy to Install: Thoroughly clean the installation surface; keep the installation environment temperature between 50°F - 85°F. In case of low temperatures, preheat the sealing strip indoors in advance; to ensure waterproofness, cut the end of the sealing strip at a 45° angle for a tight joint; use the attached adhesive-promoting wet wipes (check the humidity before use) to wipe the installation surface, and press firmly for 30 seconds after installation
Wide Range of Protection: 30mm*5M T-edge seal strip can be cut upon need for any car small sunroof(3M),panoramic sunroof(7M),both sides of windshield(2M),both sides of rear windshield(2M),etc. Note: The sunroof cannot be opened again after the rubber sealing strip is installed
Installation Note: The effective temperature range for the product to maintain its adhesiveness is 50°F - 85°F. Avoid using it in extremely high or low temperatures (below 45°F). If it is necessary to use it in extreme temperatures, it is recommended to use it with 3M sealing strip adhesive
Notes: The thickness of this product is only 3mm/0.12inch, which is relatively thin and not easy to bulge. The width is 30mm. It is recommended that you measure the gap you need to fill before purchasing to avoid incompatibility issues

Why choose this product

Superior Sealing for Indian Climates

This T-shaped EPDM rubber seal strip is specifically designed to combat the challenges of Indian weather. Its robust construction resists high temperatures and humidity, ensuring a reliable seal against monsoon rains and dust storms. Unlike generic seals, EPDM offers superior UV protection and flexibility, maintaining its integrity over time. The powerful adhesive backing ensures a secure fit, preventing common issues like water leaks and wind noise that can detract from your driving comfort. Imported directly from authorized US retailers, this seal provides a durable, long-lasting solution for your vehicle's protection.

Who It's For vs. Who Should Skip It

This weather strip is ideal for car owners in India looking to upgrade their vehicle's seals against dust, water leaks, and wind noise. It's suitable for sealing sunroofs, windshields, and tailgates on most car models. If you require a seal that allows for sunroof operation after installation, this product may not be suitable, as the sunroof cannot be opened again post-installation. Also, ensure your installation surface is clean and within the recommended temperature range (50°F - 85°F) for optimal adhesion; extreme temperatures below 45°F may require additional adhesive.

How to use

Prepare the Surface — Thoroughly clean the installation area on your car's sunroof, windshield, or tailgate. Ensure the surface is completely dry and free from dust, grease, or old adhesive. For best results, perform installation when ambient temperature is between 50°F - 85°F (10°C - 29°C).
Cut and Apply Adhesive — Measure and cut the weather strip to the required length. For a tight joint, cut the end at a 45° angle. Wipe the installation surface with the provided adhesive-promoting wipe. If temperatures are low, preheat the strip indoors or use additional 3M adhesive for better bonding.
Install and Press Firmly — Carefully peel off the backing from the adhesive strip. Align the strip with the gap and press it firmly into place for at least 30 seconds. Ensure a continuous, even pressure along the entire length for a secure and waterproof seal. Note: Sunroof operation may be restricted after installation.

Example scenarios

Typical situations where Turcee T-Car Weather Strip Seal 5m (16Ft) | Seals Gaps helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Driving through dusty regions or during monsoon season in India.

How this product helps

The Turcee T-Car Weather Strip seals gaps in your car's sunroof and windshield, preventing dust and water from entering. This keeps your car's interior cleaner and drier, reducing the need for frequent interior cleaning and protecting against water damage.

Scenario 2

Illustrative example

Where it helps

Experiencing excessive wind noise on highways during long drives across India.

How this product helps

By filling gaps around the windshield and sunroof, this EPDM rubber seal significantly reduces wind noise. This creates a quieter cabin environment, making long drives more comfortable and enjoyable, especially on open Indian roads.

Specifications & installation

Specifications

Primary Material	EPDM Rubber
Adhesive Type	Powerful Adhesive

Installation & usage

Application Position	Sunroof, Front Windshield, Rear Windshield, Tailgate
Installation Temperature Range	50°F - 85°F (10°C - 29°C)
Recommended Use	Sealing gaps to prevent dust, water leaks, and wind noise
Washable	Yes
Cuttable	Yes
Cost per meter	₹370 per meter

How we compare

Feature	Turcee T-Car Weather	Others
Material	Durable EPDM Rubber with strong adhesive	Varies by brand; some may use foam or lower-grade rubber, potentially less resistant to heat and UV.
Sealing Performance	Effectively seals gaps, reduces wind noise, dust, and water ingress.	Performance can vary; may offer basic sealing but potentially less effective against extreme weather or high speeds.
Durability & Weather Resistance	EPDM rubber offers good resistance to heat, UV, and weathering.	Local options might degrade faster under prolonged sun exposure or extreme temperatures common in India.
Length & Application	5 meters (16.4 ft) universal fit, cuttable for sunroofs, windshields, tailgates.	Lengths and application types vary; some may be vehicle-specific or shorter rolls.
Cost per meter	₹370 per meter

SKU	sxg2859
Brand	Turcee
Model Name	rubber seal
Color	Black
Material	EPDM rubber, Powerful adhesive
Length	5 meters (16.4 ft)
Width	30 mm (1.18 inches)
Thickness	3 mm (0.12 inches)
Weight	222 g (0.49 lb)
Fit Type	Universal Fit
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current Turcee T-Car Weather Strip Seal 5m (16Ft) \| Seals Gaps, Reduces Noise & DustBuy Now	Turcee T-Car Weather Strip Seal 5.5in x 16Ft (14mm x 5M) \| Seals Gaps, Reduces Noise, Protects from Dust & WaterBuy Now	Turcee T-Car Sunroof Cover Seal Rubber Trim 7M (23Ft) \| Seals Gaps Against Dust, Water & Wind NoiseBuy Now	Turcee T-Car Weather Stripping Seal 7.16 m (23.5 Ft) \| Reduces Wind Noise & Dust IngressBuy Now	Turcee T-Car Weather Stripping Seal 5M (16.4ft) \| Reduces Wind Noise & Dust IngressBuy Now	Turcee T-Car Weather Strip Seal 7m (23Ft) \| Adhesive EPDM Rubber for Windshield & SunroofBuy Now	CloudBuyer L-Shape Car Weather Stripping 20m (66ft) \| Noise Insulation & Draft SealBuy Now
Spec
Price

Turcee T-Car Weather Strip Seal 5m (16Ft) | Seals Gaps, Reduces Noise & Dust

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported