OEMTOOLS 26 Blade Master Feeler Gauge Set 0.038-0.635 mm (0.0015-0.025 Inch) | Precision Gap Measurement Tool

• Durable Material: Each of the 26 blades within this short feeler gauge set are composed of hardened and tempered steel; Never worry about this feeler gauge breaking
• Wide Range: Our automotive feeler gauge set measures from 0.0015 inch (0.038 mm) to 0.025 inch (0.635 mm); Always get an accurate calculation with this wide measurement range
• Measures Metric and SAE: Each bent feeler gauge is laser etched with both inches and millimeters, one right under the other, so they are easy to see
• Easy Blade Removal: This valve feeler gauge set features a thumb notch to easily remove the size you need and keep the blade set secure when you are done
• Chrome Plated Main Shaft: Measuring gaps between automotive parts can get messy; However, the chrome plated main shaft provides a professional look and easy clean-up

• Select the Correct Blade — Identify the desired gap measurement from the etched inch or millimeter markings on each hardened steel blade. Choose the blade that closely matches the target gap for your adjustment.
• Insert and Measure — Gently insert the selected blade between the two surfaces you need to measure. The blade should slide with slight drag; if it's too loose or too tight, try a different blade size.
• Adjust and Re-measure — Make necessary adjustments to the component (e.g., valve lash, guitar action) based on the feeler gauge's fit. Re-measure with the appropriate blade until the desired gap is achieved.
• Secure and Store — Use the thumb notch to easily remove the used blade and return it to the set. Ensure all blades are securely held within the chrome-plated shaft for storage and transport.

Typical situations where OEMTOOLS 26 Blade Master Feeler Gauge Set 0.038-0.635 mm (0.0015-0.025 Inch) | Precision Gap Measurement Tool helps — illustrative scenarios, not customer reviews.