LOVIMAG Copper Foil Tape 75mm x 7m (3" x 275") | Dual Conductive Adhesive for EMI Shielding & Electrical Repairs

• ADEQUATE COPPER FOIL TAPE - Each copper tape conductive adhesive is 75mm x 7m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.
• ADHESIVE TAPE WITH GOOD FLEXIBILITY - The conductive tape can be twisted, bent, tore easily, enable you to use copper foil by hand, no need to apply with other tool, one fit most of cables.
• EMI SHIELDING COPPER FOIL TAPE - Conductive copper tape can EMI shielding in guitar to protect your devices from electromagnetic interference.
• TAPE FOR PLANTS - You can wrap copper tape around the base of small plants and seedlings to protect plants. Copper tape can be applied to stained glass, paper circuits, soldering, grounding.
• WIDE USE - The copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will reduce the effectiveness between components.

• Prepare the Surface — Ensure the surface where the tape will be applied is clean, dry, and free from dust or oil. For electrical connections, ensure surfaces are properly prepared for soldering if required.
• Cut and Apply the Tape — Cut the desired length of copper foil tape using scissors or a craft knife. Peel off the paper backing to expose the conductive adhesive and carefully apply the tape smoothly, pressing firmly to ensure good adhesion.
• Ensure Conductivity and Shielding — For EMI shielding, overlap edges to create a continuous conductive surface. For grounding or electrical connections, ensure good contact with the component and solder to the copper foil if necessary for a permanent bond.

Typical situations where LOVIMAG Copper Foil Tape 75mm x 7m (3" x 275") | Dual Conductive Adhesive for EMI Shielding & Electrical Repairs helps — illustrative scenarios, not customer reviews.