LOVIMAG Copper Foil Tape 25mm x 20m (0.98in x 65.6ft) 2-Pack | Dual Conductive EMI Shielding for Electronics & Crafts

• ADEQUATE COPPER FOIL TAPE - Each roll is 25mm x 20m x 2; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.
• ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.
• EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.
• TAPE FOR PLANTS - You can wrap copper tape around the base of small plants and seedlings to protect plants. Copper conductive adhesive tape can be applied to stained glass, paper circuits, electrical repairs, soldering, grounding.
• DUAL CONDUCTIVITY - The conductive copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will reduce the effectiveness between components.

• Prepare the Surface — Ensure the surface where the tape will be applied is clean, dry, and free from dust or oil. For best adhesion, lightly sand or wipe down the area.
• Cut and Apply Tape — Cut the desired length of copper foil tape using scissors or a blade. Peel off the protective paper backing and carefully apply the tape smoothly, pressing down firmly to ensure good contact and adhesion.
• Ensure Conductivity — For EMI shielding or grounding, ensure the tape forms a continuous conductive path. Overlap edges slightly or use multiple pieces connected by the conductive adhesive. Solder directly to the copper foil for electrical connections.

Typical situations where LOVIMAG Copper Foil Tape 25mm x 20m (0.98in x 65.6ft) 2-Pack | Dual Conductive EMI Shielding for Electronics & Crafts helps — illustrative scenarios, not customer reviews.