Loctite PL Premium Polyurethane Construction Adhesive 10 fl oz (295 ml) Cartridge, 12 Pack | 3x Stronger Than Ordinary Adhesives

• All Purpose: One component polyurethane-based adhesive that covers a wide variety of projects and bonds to most materials for consistently successful results
• 3X Stronger: 3 times as strong as ordinary construction adhesives and stronger than many substrates it joins together
• Versatile: Ideal for sub floor installations and bonds to most common construction materials such as wood, OSB, drywall, brick, concrete, masonry, stone, foam insulation, metal, ceramic, PVC, and more
• Interior & Exterior: Paintable adhesive with no strong solvent odor that sets in 30 minutes and fully cures in 24 hours for projects inside and out
• Weather Resistant: Waterproof and can be applied directly to wet and frozen surfaces without shrinking and cures in cold temperatures

• Ensure all surfaces are clean, dry (or wet, as applicable), and free from dust, grease, or loose materials. For porous surfaces, a light priming might be beneficial. Ensure the temperature is within the recommended range for application. — Prepare Surfaces
• Cut the cartridge nozzle to the desired bead size (e.g., 1/4-inch for a strong bond). Apply a continuous bead of adhesive to one surface. For heavy materials, apply adhesive to both surfaces for maximum contact. — Apply Adhesive
• Immediately join the surfaces together with firm pressure. For subflooring, use screws or nails to secure the bond while it sets. Repositioning is possible within 30 minutes. Ensure adequate ventilation during application. — Assemble and Secure
• Allow the adhesive to cure fully for 24 hours. The bond will continue to strengthen over time. The adhesive is paintable once cured, allowing for seamless integration into your project's finish. — Cure and Finish

Typical situations where Loctite PL Premium Polyurethane Construction Adhesive 10 fl oz (295 ml) Cartridge helps — illustrative scenarios, not customer reviews.