Gizmo Dorks 468MP Double Sided Adhesive Transfer Tape Sheets 25cm x 25cm (10" x 10") | High Temp Acrylic Adhesive for 3D Print Beds

• Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications.
• High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range.
• Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required.
• Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface.
• Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds.

• Prepare the Surface — Ensure the target surface (e.g., 3D printer bed, metal plate) is clean, dry, and free from dust, oils, or grease. For best adhesion, wipe with isopropyl alcohol and allow to fully evaporate.
• Cut to Size — Carefully cut the 10" x 10" sheet to the desired dimensions using scissors or a craft knife. This allows for precise application and minimizes waste.
• Apply the Tape — Peel the protective polycoated kraft paper liner from one side of the adhesive sheet. Align the exposed adhesive carefully with the target surface and press down firmly, smoothing out any air bubbles.
• Complete the Bond — Peel the second protective liner from the exposed adhesive side. Align the object to be bonded (e.g., PEI sheet) and press firmly onto the tape. Allow adequate time for the adhesive to cure for maximum bond strength.

Typical situations where Gizmo Dorks 468MP Double Sided Adhesive Transfer Tape Sheets 25cm x 25cm (10" x 10") | High Temp Acrylic Adhesive for 3D Print Beds helps — illustrative scenarios, not customer reviews.