GEAR AID Aquaseal FD Wader & Boot Repair Kit with Tenacious Tape Patches, 0.25 Fl Oz (7.4 ml) | Waterproof Field Repair

• Repair Waders Anywhere: Patch leaks and tears in neoprene or breathable waders right at camp or waterside with this compact, waterproof repair kit.
• Flexible, Long-Lasting Seal: Aquaseal FD adhesive cures to a durable, flexible rubber that bonds permanently to neoprene, vinyl, nylon, and GORE-TEX gear.
• Tough Patch Material: Includes two 3” Tenacious Tape Repair Patches—one clear and one black nylon—with ultra-strong adhesive that won’t lift or peel.
• All-in-One Kit: Comes with a 0.25 oz tube of Aquaseal FD, Tenacious Tape patches, applicator brush, and instructions—all in a lightweight, packable case.
• Ideal for Field Repairs: Permanently fix fishing waders, drysuits, wetsuits, and even low-pressure inflatables before the next cast or paddle.

• Prepare the Damaged Area — Clean the torn or punctured area thoroughly with rubbing alcohol or a mild soap and water. Ensure the fabric is completely dry and free of dirt, oils, or any residue before proceeding with the repair.
• Apply Adhesive and Patch — Apply a thin, even layer of Aquaseal FD adhesive to the damaged area. If using a patch, place it over the adhesive, smoothing out any wrinkles. For larger tears, ensure the adhesive covers the entire area and extends slightly beyond the edges of the patch.
• Cure for Maximum Durability — Allow the repair to cure in a well-ventilated area. It becomes flexible within 2-6 hours and fully waterproof within 24 hours. Avoid stretching or stressing the repaired area until it has fully cured for a permanent, reliable bond.

Typical situations where GEAR AID Aquaseal FD Wader & Boot Repair Kit with Tenacious Tape Patches helps — illustrative scenarios, not customer reviews.