ELEGOO ABS-Like 3.0 Resin Grey 2000g (4.4 lb) | High Strength & Toughness for 405nm SLA/DLP/LCD Printers

• High Strength and Toughness — ELEGOO ABS-like resin 3.0 is engineered for high strength, impact resistance, and toughness. The printed models can withstand drilling holes and certain impacts, maintaining their structural integrity and resisting deformation, ideal for functional prototypes, mechanical parts, and industrial parts.
• High Precision & Low Shrinkage — With lower volume shrinkage, our ABS-like resin 3.0 ensures high precision in your 3D prints, resulting in intricate model details and smooth surface finishes with minimal distortion and accurate dimensional stability.
• Good Fluidity for Rapid Prototyping — Our ABS-like resin 3.0 is formulated with low viscosity to provide good fluidity for faster curing. Its viscosity is 25-47% lower than ABS-like 1.0 and ABS-like 2.0, allowing the resin to quickly flow back into the print area and peel easily from the release film. This improves print success and reduces overall print time.
• Strong Stability — Our ABS-like resin 3.0 is engineered to maintain good stability, ensuring that the resin does not delaminate or separate over time. This eliminates the need for manual stirring and guarantees consistent color across the model surface.
• Wide Compatibility — ELEGOO ABS-like resin 3.0 is compatible with a wide range of LCD/DLP 3D printers available on the market using 405nm UV light-curing technology, and works best with ELEGOO light-curing 3D printers.

• Prepare Your Printer — Ensure your 405nm LCD/DLP/SLA printer is clean and level. Pour the ELEGOO ABS-Like 3.0 Grey Resin into the resin tank, avoiding overfilling. Wear gloves and work in a well-ventilated area.
• Print Your Model — Load your 3D model file into your slicer software, set parameters for ABS-Like 3.0 resin (refer to ELEGOO's recommendations), and start the print. The low viscosity allows for faster curing and easier peeling.
• Clean and Post-Cure — After printing, carefully remove the model and clean uncured resin using isopropyl alcohol or water-washable methods. Then, post-cure the model under a UV light source to achieve its final hardened state and maximum strength.

Typical situations where ELEGOO ABS-Like 3.0 Resin Grey 2000g (4.4 lb) | High Strength & Toughness for 405nm SLA/DLP/LCD Printers helps — illustrative scenarios, not customer reviews.