Ecotex® PWR Screen Printing Emulsion - 128 Fl Oz | Water & Plastisol Ink Ready, Ultra-Fast, Durable, Made in USA

• Designed For Water Based & Plastisol Screen Printing - Developed for the screen printer who likes to use water base screen printing ink and mixing it up with plastisol silk screen ink. Our purple water resistant screen printing emulsion stands tough against water. Feel confident passing the squeegee over your designs repetitively, this is emulsion screen printing at its finest.
• Pre Mixed and Ready to Use - Take the guess work out of your silk screen printing kit with our ready to use emulsion. No mixing required with pre-sensitized water resistant emulsion. Make sure to use a good emulsion scoop coater to get clean and even coverage.
• Print in Your Favorite Ways - It doesn't matter if you are a seasoned vet with a 6 station screen printing machine or you are doing screen printing with kids. This is the perfect addition to your screen printing supplies and gives easy to use versatility.
• Works Great with All Exposure Units - Whether you are using an led exposure light unit, DIY 500 watt halogen light set up or an ultra violet LED light this silk screen emulsion will expose quickly and easy.
• Made in the USA - All of our silkscreen emulsion is made here in the USA and hand-poured by SPD's very finest to ensure ultimate quality. ADD TO CART NOW.

• Prepare the Screen — Clean and dry your screen thoroughly. Use a scoop coater to apply an even layer of Ecotex® PWR emulsion on the mesh surface.
• Expose the Screen — Place the screen under LED, halogen, or UV exposure unit. Expose until the emulsion is fully hardened, then rinse with water to develop the stencil.
• Print and Cure — Set up your screen on the press, apply water or plastisol ink, and print. Re-expose if needed for multiple runs, then cure as per ink instructions.

Typical situations where Ecotex® PWR Screen Printing Emulsion - 128 Fl Oz | Water & Plastisol Ink Ready helps — illustrative scenarios, not customer reviews.