Ecotex® PWR Screen Printing Emulsion - 16 Fl Oz | Water & Plastisol Ink Ready

• Designed For Water Based & Plastisol Screen Printing - Developed for the screen printer who likes to use water base screen printing ink and mixing it up with plastisol silk screen ink. Our purple water resistant screen printing emulsion stands tough against water. Feel confident passing the squeegee over your designs repetitively, this is emulsion screen printing at its finest.
• Pre Mixed and Ready to Use - Take the guess work out of your silk screen printing kit with our ready to use emulsion. No mixing required with pre-sensitized water resistant emulsion. Make sure to use a good emulsion scoop coater to get clean and even coverage.
• Print in Your Favorite Ways - It doesn't matter if you are a seasoned vet with a 6 station screen printing machine or you are doing screen printing with kids. This is the perfect addition to your screen printing supplies and gives easy to use versatility.
• Works Great with All Exposure Units - Whether you are using an led exposure light unit, DIY 500 watt halogen light set up or an ultra violet LED light this silk screen emulsion will expose quickly and easy.
• Made in the USA - All of our silkscreen emulsion is made here in the USA and hand-poured by SPD's very finest to ensure ultimate quality. ADD TO CART NOW.

• Prepare the Screen — Clean and degrease the screen thoroughly. Use a scoop coater to apply an even layer of the emulsion on the screen surface.
• Expose the Emulsion — Place the screen under your LED, halogen, or UV exposure unit. Expose until the emulsion is fully hardened, then rinse with water.
• Dry and Print — Dry the screen in a dark, yellow-lit area. Re-expose if needed for durability. Use water or plastisol inks for printing on textiles or paper.

Typical situations where Ecotex® PWR Screen Printing Emulsion - 16 Fl Oz | Water & Plastisol Ink Ready helps — illustrative scenarios, not customer reviews.