DONGJIAN DVI Splitter 1 in 2 Out | Supports 4K30Hz, EDID Copy, Long Distance

• DVI Splitter 1 in 2 Out — The DVI video signal is distributed to two DVI monitors and displayed on both monitors at the same time, and the two monitors display the same image, allowing you to display digital video content on multiple screens. (Note: It does not support displaying one monitor in duplicate desktop mode and another in extended desktop mode.)
• EDID Copy System — Output 1 is the EDID copy port. Connect the monitor with the desired resolution to Output 1 to copy its EDID and ensure better compatibility with other connected displays.
• High Resolution — Supports DVI signal resolutions up to 4096x2160@30Hz, and also supports non-standard DVI resolutions such as 2000x1000@60Hz. The splitter transmits the DVI signal directly without encoding or decoding, helping maintain clear image quality during transmission.
• Long-Distance Transmission — The DVI splitter supports signal transmission over a distance of 10 meters from the source to the splitter and 10 meters from the splitter to the display, for a total transmission distance of up to 20 meters.
• Easy to Use — Plug and play, operating system independent, with no software or driver required.

• Connect Source Device — Plug the DVI source (PC, DVR, projector) into the input port of the splitter.
• Connect Monitors — Attach each monitor or display device to the output ports. Ensure EDID port is connected to the preferred display for compatibility.
• Power On & Test — Plug in the power supply, turn on devices, and verify display output. No drivers needed, ready in minutes.

Typical situations where DONGJIAN DVI Splitter 1 in 2 Out | Supports 4K30Hz helps — illustrative scenarios, not customer reviews.