NEWCARE 2-Way Coaxial Cable Splitter for MoCA, 5-2400MHz, RG6 Compatible, 2-Pack Silver | Splits Digital Signal to 2 Devices

• MULTI PURPOSE 2-WAY COAX CABLE SPLITTER — NEWCARE Nickel-Plated digital coaxial xfinity cable splitter is used for splits a single digital signal to up to 2 devices. It works with cable TV, satellite, high speed internet or camera, and cable TV, amplifying antenna, amplifier, and other coaxial devices. Compatible with RG59 and RG6 coax cable.
• CAREFUL PREMIUM CONSTRUCTION — This coax splitter 2 way box is made of nickel-plated zinc press box, with better weather resistance, rust resistance, stability. The sealed housing increases waterproof protection, and the electronic component inside the device receives the internal pressure of 15 psi. Suitable for indoor, outdoor, wet / dry environments.
• LOW SIGNAL LOSS — The frequency range of this moca splitter supports up to 5-2400MHz (2.4GHz), and internal circuit board for better reliability/durability. High shielding structure with low insertion loss, high return loss and isolation for better performance on TV, satellite and all other devices’ signal. Between 1750 and 2400MHz there is low signal loss of only 4.5db on each output port improving performance and speeds.
• INSTALLATION STEPS — ①Prepare the coaxial cable and F-type male connector②Strip the coaxial cable③Connect the coaxial cable to F-type male connector④Connect the coaxial cable to the coaxial splitter. In order to make your satellite connection balance and easier, all coaxial ports of the dispenser are power passing. (NOTE: ONLY One Highest Voltage is Allowed to Pass At A Time)
• WHAT YOU GET — 2x Coaxial Splitter, 2x Screws. High-quality metal material makes the product last longer, and attention to detail is designed to provide a better using experience.

• Prepare Coaxial Cables — Ensure you have RG6 or RG59 coaxial cables with F-type male connectors. Strip the end of your main coaxial cable and attach an F-type connector securely. Repeat for the two cables that will connect to your devices.
• Connect Input Cable — Screw the prepared main coaxial cable (from your satellite dish, antenna, or wall outlet) firmly into the input port of the NEWCARE splitter. This port is typically marked or positioned differently from the outputs.
• Connect Output Cables — Connect the two prepared coaxial cables to the output ports of the splitter. Screw these cables firmly into the ports, ensuring a snug fit. These cables will then connect to your TV, satellite receiver, internet modem, or other coaxial devices.
• Secure and Test — Mount the splitter using the included screws if desired for a stable installation. Power on your connected devices and check for signal strength and quality on all outputs. Ensure the power-passing port is correctly utilized if powering an LNB.

Typical situations where NEWCARE 2-Way Coaxial Cable Splitter for MoCA helps — illustrative scenarios, not customer reviews.