beduan Pneumatic Ball Valve 1/4" x 1/4" OD Push to Connect Fitting Quick Connect Union | Air Flow Control Valve

• The bode are Made from the Resin (PBT).
• Composite Fitting Push to Connect Tube to Tube 1/4" OD X 1/4" OD.
• Applicable for water (Max Pressure: 50 PSI) and air (Max. Pressure: 284 PSI).
• Available for water , air and PPS resin body.
• The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion.

• Prepare Tubing — Ensure your 1/4" OD tubing is cut cleanly and squarely. Remove any burrs from the end of the tube to ensure a proper seal within the fitting.
• Insert Tubing — Simply push the prepared end of the 1/4" OD tubing straight into the push-to-connect port of the ball valve until it is fully seated. The internal gripping ring will secure it.
• Operate Valve — Turn the ball valve handle 90 degrees to control the flow of air or water. A quarter turn from the open position to the closed position will shut off the line.
• Disconnect Tubing — To disconnect, press the blue release collar on the fitting while simultaneously pulling the tubing out. Do not attempt to disconnect while the line is under pressure.

Typical situations where beduan Pneumatic Ball Valve 1/4" x 1/4" OD Push to Connect Fitting Quick Connect Union | Air Flow Control Valve helps — illustrative scenarios, not customer reviews.