Beduan 1/2" x 1/2" OD Push to Connect Ball Valve Set (2 Pcs) | 284 PSI Air Flow Control Union

• The bode are Made from the Resin (PBT).
• Composite Fitting Push to Connect Tube to Tube 1/2" OD X 1/2" OD.
• Applicable for water (Max Pressure: 50 PSI) and air (Max. Pressure: 284 PSI).
• Available for water , air and PPS resin body.
• The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion.

• Prepare Tubing — Ensure your 1/2" OD tubing is cut cleanly and squarely. Remove any burrs from the end of the tube to ensure a proper seal within the fitting.
• Connect Fitting — Simply push the prepared end of the 1/2" OD tube straight into the Beduan fitting until it is fully seated. The internal gripping ring will automatically secure the tube in place.
• Operate Valve — To control flow, rotate the ball valve handle. Turn it to open the line and allow air or water to pass, or turn it to close the line and stop flow. The valve is designed for quick open/close action.
• Disconnect (If Needed) — To remove the tubing, press the collar on the fitting towards the fitting body. While holding the collar down, gently pull the tube out. This releases the grip and allows for easy disconnection.

Typical situations where Beduan 1/2" x 1/2" OD Push to Connect Ball Valve Set (2 Pcs) | 284 PSI Air Flow Control Union helps — illustrative scenarios, not customer reviews.