3M Safety-Walk Slip Resistant Tape 2 inch x 15 ft (4.8cm x 4.57m) Clear | Anti-Slip Tape for Wet Conditions

• HELPS CREATE SAFER ENVIRONMENT where water is likely to create slippery surfaces such as bathrooms and recreational areas
• USES INCLUDE showers, tubs and surfboards, and around hot tubs and pools
• RESISTS WEAR for enhanced durability
• SELF-ADHESIVE BACKING for quick and easy application
• ADHERE TO CLEAN, DRY SURFACES without wrinkling, curling, tearing, shrinking or lifting
• EASY TO APPLY, cut to size with scissors
• COMFORTABLE to walk on with bare feet
• FOR BEST RESULTS area must be primed with a high-strength contact adhesive, such as 3M Hi-Strength 90 Spray Adhesive
• HELPS MEETS OSHA AND ADA COEFFICIENT of friction recommendations

• Ensure the area is clean, dry, and free from dust, grease, or soap residue. For optimal adhesion, consider priming the surface with 3M Hi-Strength 90 Spray Adhesive and allowing it to become tacky. — Prepare the Surface
• Using sharp scissors, cut the tape to the desired length and shape for your application area, whether it's a bathtub, shower floor, or walkway. — Cut to Size
• Peel off the self-adhesive backing, carefully applying the tape to the prepared surface. Press down firmly from the center outwards to eliminate air bubbles and ensure complete adhesion without wrinkling or lifting. — Apply the Tape
• For best results, allow the tape to cure for at least 24 hours before exposing it to heavy foot traffic or water. This ensures maximum adhesion and durability. — Allow to Cure

Typical situations where 3M Safety-Walk Slip Resistant Tape 2 inch x 15 ft (4.8cm x 4.57m) Clear | Anti-Slip Tape for Wet Conditions helps — illustrative scenarios, not customer reviews.