3M Safety-Walk Slip Resistant Tape 1 inch x 15 ft Clear | Durable & Long-Lasting for Wet Conditions

• HELPS CREATE SAFER ENVIRONMENT where water is likely to create slippery surfaces such as bathrooms and recreational areas
• USES INCLUDE showers, tubs and surfboards, and around hot tubs and pools
• RESISTS WEAR for enhanced durability
• SELF-ADHESIVE BACKING for quick and easy application
• ADHERE TO CLEAN, DRY SURFACES without wrinkling, curling, tearing, shrinking or lifting
• EASY TO APPLY, cut to size with scissors
• COMFORTABLE to walk on with bare feet
• FOR BEST RESULTS area must be primed with a high-strength contact adhesive, such as 3M Hi-Strength 90 Spray Adhesive
• HELPS MEETS OSHA AND ADA COEFFICIENT of friction recommendations

• Prepare the Surface — Ensure the area is clean, dry, and free from dust, grease, or soap residue. For optimal adhesion, especially in wet areas, consider priming the surface with 3M Hi-Strength 90 Spray Adhesive and allowing it to become tacky.
• Cut to Size — Measure and cut the tape to the desired length and shape using sharp scissors. This allows for custom application on stairs, tubs, or specific floor sections as needed.
• Apply the Tape — Peel off the self-adhesive backing and carefully apply the tape to the prepared surface, pressing down firmly from the center outwards to avoid wrinkles, air bubbles, or lifting. Ensure edges are sealed.
• Allow Curing Time — For best results, allow the adhesive to cure for at least 24 hours before exposing the applied area to heavy traffic or water. This ensures maximum bond strength and longevity.

Typical situations where 3M Safety-Walk Slip Resistant Tape 1 inch x 15 ft Clear | Durable & Long-Lasting for Wet Conditions helps — illustrative scenarios, not customer reviews.