HMS 2-Piece Whetstone Set 7-Inch | 400/1000/3000 Grit Knife Sharpening Stones

• Two-Stone Set — Includes one dual-sided 400/1000-grit whetstone and one 3000-grit whetstone.
• Three Care Stages — The 400-grit surface is the coarser stage, 1000 grit supports refining, and 3000 grit supports finishing care.
• Verified Stone Sizes — Both stones measure 7 x 2 5/16 inches; heights are 1 3/16 inches and 9/16 inch.
• Easy-to-Distinguish Formats — The thicker 400/1000 stone pairs with the slimmer 3000 stone in one organized set.
• Sword and Knife Edge Care — Intended for suitable blades when the selected grit and care method match the item being maintained.

• Prepare the Stones — Submerge both whetstones in water for 5-10 minutes until they are fully saturated and no longer release air bubbles. This ensures proper lubrication during sharpening.
• Repair and Sharpen — Use the 400-grit side of the dual-sided stone for any repairs or to establish a new edge. Then, flip to the 1000-grit side to refine the edge and remove scratches from the coarser grit.
• Hone and Polish — Switch to the 3000-grit stone. Use light pressure to hone the edge, creating a super-sharp, shining finish. Maintain a consistent angle throughout the sharpening process for best results.
• Clean and Store — Rinse the stones and your knife under running water to remove any slurry. Dry the stones thoroughly before storing them in a dry place to prevent damage or rust.

Typical situations where HMS 2-Piece Whetstone Set 7-Inch | 400/1000/3000 Grit Knife Sharpening Stones helps — illustrative scenarios, not customer reviews.