WeldingStop 6 inch (15 cm) Machinist Ruler | Flexible Stainless Steel Rule with 5R Graduations

• This a 6 in machinist scale or 150mm length and 5R ruler rigid which is made by high quality Stainless Steel, it can be lightly flexible and thin
• 5R scale graduations have 10th and 100th on one side and quick-reading 32th and 64th machinist scale inch on the other side
• The sides of each machinist rule are ground parallel and each end is accurately ground square to allow reading from either end
• The ruler is 1/2'' or 12.5mm width, and 0.025'' or 0.6mm thickness. Both long edges are ground flat and straight
• All the scales are Laser Engraving, very clear and easy to read. This type of engraving can make the scale not easy to wear after long time using

• Select Desired Scale — Choose the appropriate scale for your measurement needs: use the 10ths, 100ths, 32nds, or 64ths inch graduations on one side for machinist work, or the 150mm (15 cm) metric scale on the other.
• Align for Measurement — Place the ruler's edge precisely along the surface or line you need to measure. Ensure the zero mark aligns perfectly with the starting point for accurate readings.
• Read Measurement Accurately — Read the measurement at the desired point. The laser-engraved scales offer high visibility and minimal parallax error, allowing for precise readings from either end or side.
• Use as Straight Edge (Optional) — For drawing straight lines or guiding cuts, align the ruler's flat, straight edge with your intended line. The rigid stainless steel construction provides a stable guide.

Typical situations where WeldingStop 6 inch (15 cm) Machinist Ruler | Flexible Stainless Steel Rule with 5R Graduations helps — illustrative scenarios, not customer reviews.