Wayne EEAUP250 1/4 HP Reinforced Thermoplastic Submersible Pump | Hands-Free Water Removal

• Hands-Free Water Removal: WAYNE model EEAUP250 has iSwitch technology, which activates the pump once the water level is above 1-3/4 inch and automatically turns off when the water drops to below 1/2 inch
• Automatic Pumping: Water level must be at least 1-3/4 inch for the pump to turn on, prime, and operate; water levels less than 1-3/4 inch won’t activate the iSwitch to start the pump, so manual activation will be needed
• Efficient Design: Reinforced and sealed submersible design; once activated, the pump removes water down to 1/2” on the surface
• Additional Features: Able to handle flat areas like basements, driveways, etc. as well as tight spaces such as window wells and fish tanks
• Quality You Deserve: Proudly assembled in the USA for quality you can trust; since the iSwitch turns off the pump when the water is below 1/2 inch there is no need to unplug it; this pump will not run dry

• Place the Pump on a Flat Surface — Ensure the pump is on a stable, flat surface above water level. Connect to power with a converter if needed, and submerge fully.
• Activate and Monitor — Water exceeding 1-3/4 inches activates the pump automatically. Check periodically to ensure proper operation, especially in high water scenarios.
• Maintain & Store — After use, clean the pump, store in dry place. No need to unplug during operation; it turns off automatically below 1/2 inch.

Typical situations where Wayne EEAUP250 1/4 HP Reinforced Thermoplastic Submersible Pump | Hands-Free Water Removal helps — illustrative scenarios, not customer reviews.