Vita Vibe Wall-Mounted Single Ballet Barre, 20 Ft, Wood | Fixed Height for Dance & Fitness

• Professional Grade ballet barres perfect for your studio or home! Hand-Crafted in the USA VITA manufactures all products right here in South Carolina with our customers satisfaction and safety always top of mind. Customer support is available and easy to reach.
• Barres are 1-1/2" diameter ideal for hands of all sizes. Wood barres are natural, unfinished, and sanded smooth. All Wood material is sourced in the USA. Aluminum barres are powder coated with a satin silver color finish. These barre lengths are cut shorter than stated length: 4=47.5, 5=59.5, 6=71.5, 8=95.5. Longer length barre systems over 8' ship in multiple barre sections (See Chart provided for barre section lengths and number of brackets included in each system length)
• Wall Brackets are made of heavy gauge steel and feature a powder coated finish. The number of wall brackets required depends on the length of the barre. Brackets may be placed anywhere along the barre length; however, a bracket is required wherever barres are joined.
• Our stock systems are configured for a maximum 4 bracket spacing. In some cases, bringing the end brackets in a few inches, to allow for some barre overhang may create bracket spacing that is less than 4 on each end. You may need to purchase a longer barre system. The use of a backerboard securely mounted to the wall is recommended so that the brackets may be mounted at the required spacing.
• Each system includes all hardware needed for basic installation into wood wall studs. Screws are provided for use underneath each bracket collar to secure the barres. Allow a minimum of 2 per person for all activities. Barre's support 100 lbs. per linear foot of static weight when properly installed. Ballet barres are typically mounted at 42 top of barre height, 42 and 32 for double barres.

• Prepare Wall & Hardware — Ensure wall is suitable for mounting, locate wall studs, and gather included hardware for secure installation.
• Mount Brackets — Position brackets along the wall at desired height, mark drill points, and secure brackets into wall studs using provided screws.
• Install Barre Sections — Attach barre sections to brackets, ensuring even spacing and secure fit. Use additional brackets if needed for longer spans.
• Test & Adjust — Ensure stability by applying weight gradually, adjust brackets if necessary, and confirm support capacity before use.

Typical situations where Vita Vibe Wall-Mounted Single Ballet Barre helps — illustrative scenarios, not customer reviews.