VANPO Digital Torque Screwdriver 0.3-6 Nm (2.66-53.10 in-lb) | ±2% Accuracy, 1/4" Drive

• Precision Digital Torque Screwdriver for Delicate Fastening-This 1/4 digital torque wrench (screwdriver-style) delivers 2.66–53.10 in-lb / 0.3–6 Nm with ±2% professional-grade accuracy. As an inch pound torque screwdriver, it is engineered for low-torque applications where exact clamping force is non-negotiable — from carbon fiber bike frames to firearm optics and PC motherboards.
• Stop Stripped Threads & Broken Bolts for Good- Over-tightening ruins expensive components; under-tightening causes dangerous loosening. This digital torque screwdriver eliminates guesswork with real-time LCD readout and a smart dual-alert system (LED flash + audible buzzer) that warns you as you approach the preset value. Whether you're a gunsmith mounting a precision scope or an electrician torquing control panel terminals, you get consistent, repeatable fastening — zero over-tightening, zero stripped threads.
• Built for Gunsmiths, Electricians, Bike Mechanics & PC Builders-This torque screwdriver set is the go-to torque driver for professionals and serious hobbyists alike: gunsmithing for mounting scopes, red dots, and night vision without damaging receivers; bicycle maintenance for carbon fiber seatposts, stems, and derailleurs; electronics and PC assembly for motherboards, M.2 drives, and delicate connectors; and electrical work for terminating breakers, switches, and sensors with electric torque screwdriver precision.
• 6 Presets + 500-Data Memory- Unlike basic torque tools, this digital torque screwdriver lets you program 6 custom presets (M1–M6) and switch instantly between Nm, in-lb, ft-lb, and kg-cm — no manual recalibration between tasks. With 500-set data memory for quality control audits, it's the torque screwdriver that works as hard as you do.
• Professional-Grade Accuracy, Ergonomic Design, 24-Month Warranty- Precision is meaningless without reliability. This torque screwdriver features a TPR non-slip handle and reinforced nylon core for daily shop-floor use. Backed by a 24-month warranty and delivered in a heavy-duty storage case, it's a long-term investment that pays for itself in prevented damage alone.

• Select Unit and Preset — Choose your desired measurement unit (Nm, in-lb, ft-lb, kg-cm) and select a preset torque value (M1-M6) or manually set the target torque using the LCD screen. Ensure the tool is powered on and the battery is sufficient.
• Apply Steady Force — Attach the appropriate screwdriver bit. Position the fastener and apply steady, continuous force. Watch the LCD screen for real-time torque readings and listen for the audible buzzer and watch for the LED flash as you approach the preset value.
• Confirm Torque and Reset — Stop applying force immediately when the dual-alert system signals the target torque has been reached. After use, always reset the torque setting to the lowest value (0.3 Nm) to preserve the internal spring's calibration and store the tool in its case.

Typical situations where VANPO Digital Torque Screwdriver 0.3-6 Nm (2.66-53.10 in-lb) | ±2% Accuracy helps — illustrative scenarios, not customer reviews.