Vallejo Grey Acrylic Surface Primer 18ml (0.6 fl oz) | Matte Finish & Fast Drying for Models

• The primer is the first layer of colour that is applied on the model in order to prepare the surface for the subsequent painting processes. In order to guarantee an excellent adherence it is necessary to apply it on a previously ‘degreased’ surface, therefore it is advisable to wash the model or the figure before priming it in order to remove the remains of release agents.
• Vallejo Primers is a range of acrylic primers specially formulated for airbrushing. Recommended compressor settings for our colours are around 15 - 20 PSI or 0.5 to 1 kg.
• The primers are applied in successive coats and dry quickly, forming a homogeneous film of extraordinary hardness and resistance within a few hours after application. They can be used directly or diluted with our Airbrush Thinner (B002X6DTHK) or Flow Improver (B00QD780G0).
• The grey primer is available in 18 ml (0.6 fl. oz.) bottles with dropper, and 60 ml (2.02 fl. oz.) and 200 ml (6.76 fl. oz.) bottles with hinged cap and dropper.
• Note: The brand Vallejo is currently in the process of rebranding, therefore, for a period of time, it is possible that you may receive the product with either the new packaging or the old packaging.

• Prepare the Surface — Wash your model or figure with mild soap and water to remove any dust, grease, or release agents. Ensure the surface is completely dry before proceeding to guarantee optimal primer adhesion.
• Apply the Primer — For airbrushing, use around 15-20 PSI. Apply in successive thin coats, allowing each to dry slightly. The primer can be used directly or diluted with Vallejo Airbrush Thinner or Flow Improver for desired consistency.
• Allow to Dry and Cure — The primer dries quickly, forming a homogeneous film. For best results and maximum hardness and resistance, allow it to cure fully for a few hours before applying subsequent paint layers.

Typical situations where Vallejo Grey Acrylic Surface Primer 18ml (0.6 fl oz) | Matte Finish & Fast Drying for Models helps — illustrative scenarios, not customer reviews.