uxcell M5 x 6mm L x 7mm OD Brass Knurled Insert Nuts (30 Pcs) | Thread Size M5 x 0.8mm

• SIZE — Thread Dia: M5; Pitch: 0.8mm; Overall Size: 7mm x 6mm / 0.28" x 0.24"(OD*L)
• MATERIAL — Made of brass material, with high hardness, durability, good thermal conductivity and heat resistance.
• FEATURE — The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
• ADVANTAGE — Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension.
• APPLICATION — Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection.

• Prepare the Plastic Component — Drill a hole in the plastic component that matches the outer diameter (7mm) of the insert nut. Ensure the hole is clean and free of debris for optimal embedding.
• Install the Insert Nut — Using a heat source (like a soldering iron tip or a specialized ultrasonic machine), carefully heat the brass insert nut. Press the heated nut into the prepared hole until it is flush with the plastic surface.
• Allow to Cool and Secure — Let the insert nut cool completely. As it cools, the plastic will solidify around the knurled exterior, creating a strong, permanent mechanical lock that resists rotation and pull-out.

Typical situations where uxcell M5 x 6mm L x 7mm OD Brass Knurled Insert Nuts (30 Pcs) | Thread Size M5 x 0.8mm helps — illustrative scenarios, not customer reviews.