Tru-Flate 17-551 Dial Tire Pressure Gauge 0-60 PSI | Accurate Measurement for Cars, Vans, Light Trucks

• Professional type dial in a drawn steel casing with a nickel plated brass chuck
• Easy to read dial
• 3-60 PSI in 1 pound increments
• Automatic reset and pressure release valve
• Use for passenger, cars, vans and light trucks

• Prepare for Measurement — Ensure tires are at normal temperature (not recently driven at high speed). Remove the valve cap from one tire's Schrader valve stem.
• Attach Gauge to Valve — Firmly press the gauge's brass chuck onto the tire's valve stem. You should hear a slight hiss as it seals. The dial needle will immediately indicate the tire's current pressure.
• Read Pressure and Adjust — Note the PSI reading on the easy-to-read dial. If pressure is too high, use the pressure release valve to let out air. If too low, add air and re-measure until optimal pressure is achieved.
• Complete and Store — Once the correct pressure is set, remove the gauge and replace the valve cap. Reset the gauge dial if needed and store it in a safe place for future use.

Typical situations where Tru-Flate 17-551 Dial Tire Pressure Gauge 0-60 PSI | Accurate Measurement for Cars helps — illustrative scenarios, not customer reviews.