Trimaco Tack Cloth 18" x 36" Tan (Pack of 1) | Dust-Free Surface Prep for Fine Finishes

• Dimensions: 18' x 36'
• Use to prepare a dust free surface after sanding or before painting
• Color: Tan
• Reusable if not totally filled with dust: seal in bag for future use
• Cloth is impregnated with resin to grab dust and dirt without a stick residue.
• Essential for achieving a fine finish with all primers, sealers, urethane and other coatings.
• Individually-sealed cloths have a long shelf-life to preserve tackiness for your next project.

• Prepare the Surface — After sanding your project surface, gently wipe it down with a clean, dry cloth to remove loose dust. Ensure the area is well-ventilated.
• Apply Tack Cloth — Unfold the Trimaco Tack Cloth and lightly wipe it over the sanded surface. Use a gentle, sweeping motion to pick up fine dust and particles without applying excessive pressure.
• Check and Repeat if Necessary — Inspect the surface for any remaining dust. If the cloth is heavily saturated, seal it in its bag and use a fresh section or a new cloth for optimal dust removal.
• Proceed with Finishing — Once the surface is completely dust-free, immediately proceed with applying your primer, sealer, urethane, or topcoat to ensure dust does not resettle.

Typical situations where Trimaco Tack Cloth 18" x 36" Tan (Pack of 1) | Dust-Free Surface Prep for Fine Finishes helps — illustrative scenarios, not customer reviews.