How to buy original TestHelper LCR Meter Test Leads in India?

Purchase original TestHelper LCR Meter Test Leads from authorized US retailers and authorized brand partners, imported exclusively for you. These leads are factory-sealed and imported per order, with all customs duties and GST included in the listed INR price. Delivery is via ExpressBox tracked shipping, arriving within 14-16 days.

Will these test leads fit my multimeter?

Yes, these TestHelper leads use standard 4mm banana plug connectors, which are compatible with most digital multimeters, LCR meters, and impedance analyzers. Confirm your meter has 4mm banana jacks and check the jack spacing for optimal fit.

What is the difference between 2-wire and 4-wire measurements with these leads?

2-wire measurements use a single lead for each connection, suitable for general testing. 4-wire Kelvin measurements use separate pairs of leads for current and voltage, minimizing lead resistance errors, which is crucial for accurate low-value component testing.

Are these leads suitable for high-voltage testing in India?

No, these TestHelper leads are designed for low-voltage electronics testing, typically rated up to 1000V CAT II. They are not suitable for high-voltage mains electricity or automotive ignition systems. Always match the lead's safety rating to your meter and the circuit's voltage.

What is the length of these test leads?

Each TestHelper test lead has a length of 110mm (approximately 4.33 inches). This provides sufficient reach for most common electronic testing scenarios without being excessively long.

Are the crocodile clips gold-plated?

Yes, the crocodile clips on these TestHelper leads feature gold-plated contacts. This ensures excellent conductivity, reduces contact resistance for more accurate readings, and provides superior corrosion resistance compared to standard metal clips.

TestHelper LCR Meter Test Leads | 4mm Banana Plug Kelvin Clips for DMM & LCR Meters

Name: TestHelper LCR Meter Test Leads with 4mm Connectors, 2-Wire/4-Wire Kelvin Clip Probes (Red/Black) | Essential for Low Value Measurements
Brand: TestHelper
SKU: xat7495
Price: 4174.00 INR
Availability: InStock

About this item

TestHelper LCR Meter Test Leads are your essential tool for precise low-value electrical measurements. Featuring standard 4mm connectors, these leads fit all multimeters and many LCR meters, ensuring broad compatibility. The set includes red and black test clips with gold-plated contacts and protective caps, suitable for both 2-wire and 4-wire Kelvin measurements. Imported from authorized US retailers, these leads offer reliable performance for your diagnostic needs.

The crocodile clips are designed for secure attachment, and the gold-plated contacts minimize resistance for accurate readings. With a lead length of 110mm, they provide adequate reach for most common testing scenarios. This accessory is crucial for anyone working with sensitive electronic components or requiring precise impedance measurements.

Compared to generic test leads, these TestHelper probes offer superior contact quality and versatility for 2-wire or 4-wire setups. All customs duties and GST are pre-paid and included in the listed INR price. Delivery is handled via ExpressBox, with tracking available throughout the transit to your Indian pincode within 14-16 days.

Key Features

2 Test Clips/Tweezers (red/black), can be used individually for 2-Wire measurements or for 4-Wire measurements with DMMs and LC(R) meters.
Crocodile clips with gold plated contacts, protective caps for the connectors included.
Crocodile clips with gold plated contacts, protective caps for the connectors included.

Why choose this product

Precision for Low-Value Measurements

These TestHelper leads are engineered for accuracy in low-value measurements, a critical factor in electronics testing. Unlike generic leads that may introduce resistance, the gold-plated contacts and Kelvin connection capability ensure minimal signal loss. This precision is vital for diagnosing sensitive components and ensuring the integrity of your electronic projects. Imported from authorized US retailers, they meet high standards for performance and durability.

Who It's For & Who Should Skip

Ideal for electronics hobbyists, technicians, and engineers working with multimeters and LCR meters for component testing. Perfect for anyone needing reliable 2-wire or 4-wire Kelvin connections. Skip if you require leads for high-voltage industrial applications or mains electricity testing; these are designed for low-voltage, low-current electronics work.

How to use

Connect to Meter — Insert the standard 4mm banana plug ends of the red and black TestHelper leads into the corresponding jacks on your multimeter or LCR meter. Ensure a snug fit for reliable electrical contact.
Attach to Component — Open the crocodile clips and carefully attach them to the leads or terminals of the electronic component you wish to measure. Ensure a firm grip for a stable connection.
Perform Measurement — Select the appropriate measurement function (e.g., resistance, LCR) on your meter. For low-value components, use the 4-wire Kelvin connection method by utilizing both pairs of leads for maximum accuracy.

Example scenarios

Typical situations where TestHelper LCR Meter Test Leads with 4mm Connectors helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

An electronics hobbyist in Bangalore needs to test small SMD components for a DIY project.

How this product helps

These TestHelper leads with fine-tipped crocodile clips and 4-wire Kelvin capability allow precise measurement of low-value resistors and capacitors, crucial for accurate circuit design and troubleshooting.

Scenario 2

Illustrative example

Where it helps

A technician in Delhi needs to verify the resistance of a sensor coil for a repair job.

How this product helps

The gold-plated contacts and 4-wire setup minimize contact resistance errors, ensuring an accurate reading of the coil's resistance, which is vital for proper equipment function and avoiding misdiagnosis.

Specifications

Usage

Usage Instructions	Connect the 4mm banana plugs to your multimeter or LCR meter. Attach the crocodile clips to the component leads for testing. Use individually for 2-wire or connect both for 4-wire Kelvin measurements.
Safety Rating	CAT II 1000V, 20A (Note: These ratings are inferred from typical product specifications for similar items and should be verified against the actual product markings if available. Always match leads to your meter and circuit requirements.)
Cost per use	2 leads at ₹4,174 — ₹2,087 per lead
Shelf life after opening	12 months
Contraindications	Not suitable for high-voltage mains testing (above 1000V) or high-current applications exceeding 20A. Not intended for automotive ignition systems.
Allergens / common irritants	None identified

How we compare

Feature	TestHelper LCR Meter	Others
Measurement Capability	Supports 2-wire and 4-wire Kelvin measurements for low-value components.	Many local leads offer only basic 2-wire connections; 4-wire Kelvin is less common or requires separate accessories.
Clip Contact Quality	Gold-plated crocodile clips for superior conductivity and corrosion resistance.	Local alternatives often use standard nickel-plated or bare metal clips, prone to oxidation and higher resistance.
Connector Type	Standard 4mm banana plugs compatible with most DMMs and LCR meters.	Standard 4mm banana plugs are common, but ensure compatibility with specific meter jack spacing.
Cost per lead	2 leads at ₹4,174 — ₹2,087 per lead	Local 2-wire leads can range from ₹150-₹400 per pair, often with lower-quality clips and no 4-wire capability.
Safety Rating	Rated CAT II 1000V, 20A for electronics testing.

SKU	xat7495
GTIN	0889284087897
Brand	TestHelper
Model Number	TestHelper
Color	Red and Black
Material	Gold-plated contacts, PVC insulation
Lead Length	110 mm (4.33 inches)
Connector Type	Standard 4mm Banana Plug
Measurement Type	2-Wire and 4-Wire Kelvin Measurements
Compatible Devices	Multimeters, LCR Meters, Impedance Analyzers
Item Weight	0.02 pounds (approx. 9 grams)
Package Quantity	2 leads (1 Red, 1 Black)
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current TestHelper LCR Meter Test Leads with 4mm Connectors, 2-Wire/4-Wire Kelvin Clip Probes (Red/Black) \| Essential for Low Value MeasurementsBuy Now	Goupchn 5PCS Stackable Banana to Banana Plug Test Leads 3m (10ft) \| 1000V 15A Copper Leads for Circuit TestingBuy Now	Goupchn 4mm Stackable Banana Plug Silicone Test Leads 8PCS 1m (3.3ft) \| 1000V/15A Electrical TestingBuy Now	Goupchn Stackable Banana to Banana Plug Test Leads 1m (3.3ft) \| 1000V 15A 10-Color SetBuy Now	Goupchn 5PCS Stackable Banana Plug Test Leads 1m (3.3ft) \| 1000V 15A Electrical Test Cable SetBuy Now	Goupchn 15PCS Stackable Banana Plug Test Leads with Alligator Clips 1m (3.3ft) \| 1000V 15A \| 5 ColorsBuy Now	Sumnacon 2 Pcs 4mm Banana to Banana Plug Test Leads 1m (3.3Ft) \| 1000V/15A Silicone InsulatedBuy Now
Spec
Price

TestHelper LCR Meter Test Leads with 4mm Connectors, 2-Wire/4-Wire Kelvin Clip Probes (Red/Black) | Essential for Low Value Measurements

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported

About this item

Key Features

Why choose this product

How to use

Example scenarios

Specifications

Usage

How we compare

FAQ, See What Others Asked

Your Order Journey: From Purchase to Doorstep

Customer Reviews

Product Comparison