TESOT SUS304 Stainless Steel Sink Caddy with Suction & Adhesive, Silver | Compact Dish Cloth & Sponge Holder

• Important Compatibility Notice - This product includes both adhesive hooks and suction cups for installation. Please note that the adhesive method is the primary and recommended option. The suction cups are designed to work exclusively on smooth, non-porous surfaces such as polished tile, stainless steel, or glass. If your sink surface has a textured, stone, or matte finish, please use the included adhesive pad instead. If the suction cup does not adhere securely, please first check whether your sink surface is compatible with suction cups.
• Easy Tips - If the suction cup isn’t sticking well, try these simple steps: 1.Clean both the surface and the suction cup with warm, soapy water. 2. Soak the suction cup in warm water for 1–2 minutes to soften it. 3. Press the suction cup firmly to remove any air bubbles. 4. Make sure it’s installed on a flat surface—avoid corners or curved areas.
• Adhesive hooks keep the sink caddy securely in place without slipping. When removed, they won’t leave any sticky residue on the sink's inner wall. Step 1: Make sure the sink wall is completely dry. Step 2: Peel off the protective film and firmly press the adhesive against the wall to remove any air bubbles. Step 3: Wait at least 5 hours before hanging the shelf. Simply snap it into place on the two hooks.
• Sponge holder dimensions: 7" L x 2" W x 2.4" H. Please note: This model is more compact than standard sink caddies. We strongly recommend measuring your sink before purchase to ensure a proper fit. Weight capacity: Supports up to 1.5 lbs. To maintain long-term stability and performance, please avoid exceeding this limit.
• Please review the product information carefully before purchase. If you have any questions or concerns, please contact our customer support team — we’re happy to help.

• Clean Surface — Ensure the sink wall is dry and free of dust. For suction cups, clean both the surface and the cup with warm, soapy water, then dry thoroughly.
• Install Using Adhesive or Suction — Peel off the protective film from the adhesive hooks and press firmly on the dry surface. For suction cups, press firmly on a flat, smooth surface, removing air bubbles.
• Wait & Use — Allow at least 5 hours for the adhesive to set before hanging sponges or cloths. Supports up to 1.5 lbs for daily kitchen use.

Typical situations where TESOT SUS304 Stainless Steel Sink Caddy with Suction & Adhesive helps — illustrative scenarios, not customer reviews.