TEAR-AID Fabric Repair Kit, Type A Clear Patch 3"x 12" | UV Resistant, US Made, 2 Pack

• TEAR-AID Repair Patches provide a simple and easy method of patching holes and tears, as well as an excellent protective film solution. Each TEAR-AID Repair Patch is made from an exceptionally tough, matte finish, abrasion resistant, elastomer that resists puncture and tearing
• The TEAR-AID Type A Fabric repair patch works on - Canvas, Rubber, Neoprene, Nylon, Most fabrics, Plastics, Polyethylene, Polypropylene, Polyurethane, Non-oiled Leather, Umbrellas, Gore-Tex, Acrylics, Fiberglass, Aluminum, Polyester, Hypalon and Dacron
• The TEAR-AID patch is see-thru to work on any color and is UV resistant to prevent yellowing for years. It provides instant adhesion with no sewing, NO GLUE and no mess. The patch also conforms to irregular surfaces and won’t turn gummy in high heat
• Each patch kit contains - (1) 3" x 12" TEAR-AID Patch that cuts easily with scissors to any size, (1) 7/8 x 7/8" Patch, (1) 1 3/8 x 1 3/8" Patch, (1) 12" Reinforcement Filament for repairing tears at edges, (2) Alcohol Prep Pads, (1) Illustrated Instructions, Kit Dimensions: 3"x 5.5"x 1.25"
• TEAR-AID repair patches are MADE IN THE U.S.A. of the highest quality and standards. Keep TEAR-AID handy and be prepared to be a hero. Don’t throw it away repair it.
• TEAR-AID Repair Patches provide a simple and easy method of patching holes and tears, as well as an excellent protective film solution. Each TEAR-AID Repair Patch is made from an exceptionally tough, matte finish, abrasion resistant, elastomer that resists puncture and tearing
• The TEAR-AID Type A Fabric repair patch works on - Canvas, Rubber, Neoprene, Nylon, Most fabrics, Plastics, Polyethylene, Polypropylene, Polyurethane, Non-oiled Leather, Umbrellas, Gore-Tex, Acrylics, Fiberglass, Aluminum, Polyester, Hypalon and Dacron
• The TEAR-AID patch is see-thru to work on any color and is UV resistant to prevent yellowing for years. It provides instant adhesion with no sewing, NO GLUE and no mess. The patch also conforms to irregular surfaces and won’t turn gummy in high heat
• Each patch kit contains - (1) 3" x 12" TEAR-AID Patch that cuts easily with scissors to any size, (1) 7/8 x 7/8" Patch, (1) 1 3/8 x 1 3/8" Patch, (1) 12" Reinforcement Filament for repairing tears at edges, (2) Alcohol Prep Pads, (1) Illustrated Instructions, Kit Dimensions: 3"x 5.5"x 1.25"
• TEAR-AID repair patches are MADE IN THE U.S.A. of the highest quality and standards. Keep TEAR-AID handy and be prepared to be a hero. Don’t throw it away repair it.

• Prepare the Surface — Clean the area thoroughly, dry completely, and cut the patch to desired size with scissors.
• Apply the Patch — Peel off backing, press firmly on the tear or hole, smoothing out air bubbles for a secure bond.
• Allow to Set — Hold for 30 seconds, then use immediately. For best results, avoid stretching or stressing the patch for 24 hours.

Typical situations where TEAR-AID Fabric Repair Kit helps — illustrative scenarios, not customer reviews.