SP Silicon Power 1TB NVMe M.2 PCIe Gen3x4 SSD | PCIe 3.0 x4, 2200MB/s Read, 1600MB/s Write, M.2 2280, TLC NAND, 600 TBW

• PCIe Gen 3x4 interface with read speeds up to 2,200MB/s and write speeds up to 1,600MB/s
• TBW=600
• The warranty terms on all of its SSDs are based on whether the warranty length or TBW limit occurs first.
• To support a Silicon Power PCIe SSD, the system must have an M. 2 connector with only an M key. The Silicon Power PCIe SSD does not have a b notch and therefore, the b key on the SSD connector will prevent it from being inserted
• The custom screw should come with the motherboard or PC. Please acquire the screw from your motherboard or PC Manufacturer, if needed

• Power Down and Open System — Turn off your laptop or desktop, disconnect power, and open the M.2 slot on your motherboard or laptop.
• Insert the SSD — Align the M key notch with your system's slot, gently insert the SSD at an angle, then secure with the provided screw.
• Boot and Format — Power on your system, initialize the drive in Disk Management (Windows) or Disk Utility (Mac), and format for use.

Typical situations where SP Silicon Power 1TB NVMe M.2 PCIe Gen3x4 SSD | PCIe 3.0 x4 helps — illustrative scenarios, not customer reviews.