Shapton GlassStone 16000 Grit Water Stone 203mm x 70mm (8.27" x 2.76") | Ultra Fine Ceramic Knife Sharpener

• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
• Very high density of those particles in each stone
• Have a high degree of uniformity in the distribution of the particles
• Combination of uniform particle size and the dense

• Soak the Shapton GlassStone 16000 grit water stone in water for 5-10 minutes before its initial use. For subsequent sharpening sessions, simply splash water onto the surface as needed to keep it lubricated. — Prepare the Stone
• Hold your knife or tool at a consistent angle (typically 15-20 degrees) against the stone. Move the blade across the surface in a controlled motion, applying even pressure. Work from heel to tip to ensure the entire edge is sharpened. — Sharpen the Blade
• Continue sharpening until a burr forms on the opposite side of the edge. Then, flip the blade and repeat the process. Use light pressure on the final strokes to polish the edge and remove the burr, creating a mirror finish. — Refine and Polish
• After sharpening, rinse the stone thoroughly under running water to remove any slurry or debris. Rinse the blade as well. Store the stone flat in a dry place, away from direct sunlight, to ensure its longevity. — Clean and Store

Typical situations where Shapton GlassStone 16000 Grit Water Stone 203mm x 70mm (8.27" x 2.76") | Ultra Fine Ceramic Knife Sharpener helps — illustrative scenarios, not customer reviews.