Red Line Water Wetter Super Coolant 340 ml (12 Fl Oz) | Reduces Engine Temperature

• UNIQUE AGENT - for cooling systems that doubles the wetting ability of water
• RUST AND CORROSION PROTECTION - allows for use of straight water in racing or reduced antifreeze levels in warm climates
• DIRECTIONS FOR USE - one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters, vehicles with larger cooling systems should use two bottles, small cooling systems should use 1oz (3 to 4 capfuls) per quart
• POPULAR FOR USE IN - new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems, satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes
• WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises

• Drain and Flush Cooling System — If using plain water or switching antifreeze types, drain the old coolant. Flush the system with distilled water to remove any residue or contaminants before adding new coolant.
• Add Water Wetter — For most cars (3-5 gallon systems), add one 340ml (12oz) bottle of Red Line Water Wetter. For smaller systems, use 1oz per quart. For larger systems, use two bottles.
• Fill with Coolant or Water — Fill the cooling system with either plain distilled water (for racing) or your chosen antifreeze mixture. Ensure the system is properly filled and bled of air for optimal circulation.
• Run Engine and Monitor — Start the engine and let it reach operating temperature. Check for leaks and monitor the temperature gauge to confirm improved cooling performance. Top off if necessary after bleeding.

Typical situations where Red Line Water Wetter Super Coolant 340 ml (12 Fl Oz) | Reduces Engine Temperature helps — illustrative scenarios, not customer reviews.