How to buy an original Permatex Form-A-Gasket #2 Sealant in India?

Purchase directly from crowcrowcrow.com to ensure you receive an original, factory-sealed Permatex Form-A-Gasket #2 Sealant. We import directly from authorized US retailers and brand partners, with all customs duties and GST included in the listed price. Your order is shipped via ExpressBox with tracking.

Is this Permatex sealant safe for engine sensors and electronics?

This Permatex Form-A-Gasket #2 Sealant is a non-hardening type and generally considered safe for use near engine components. However, it is not specifically labeled as 'sensor-safe' or 'low-volatility' like some specialized RTV silicones. For applications directly adjacent to oxygen sensors or sensitive electronics, consult your vehicle's manual or consider a dedicated sensor-safe gasket maker.

What is the temperature range for this Permatex sealant?

The Permatex Form-A-Gasket #2 Sealant can withstand temperatures from -65°F to 400°F (-54°C to 204°C). This wide range makes it suitable for various automotive applications, including areas exposed to engine heat and exhaust components.

How long does this sealant take to cure?

Permatex Form-A-Gasket #2 is a slow-drying, non-hardening sealant. It is designed to remain pliable, allowing for easy disassembly. While it resists common shop fluids and fuels once applied, it does not fully harden like some RTV silicones. The exact cure time depends on application thickness and environmental conditions.

Can I use this sealant for oil pan gaskets?

Yes, Permatex Form-A-Gasket #2 Sealant is specifically suggested for applications like oil pan gaskets and valve cover gaskets. Its ability to seal cut gaskets and stamped parts effectively, while resisting oil and grease, makes it a suitable choice for these automotive components.

What is the difference between Form-A-Gasket #1 and #2?

Form-A-Gasket #2 is a slow-drying, non-hardening sealant that remains pliable, allowing for easy disassembly. Form-A-Gasket #1 is a fast-drying, hard-setting sealant that provides a stronger bond. Choose #2 when easy disassembly is a priority, and #1 when a more permanent, rigid seal is needed.

Permatex Blue 3 oz Sealant | Form-A-Gasket #2 for Gaskets & Parts

Name: Permatex Form-A-Gasket #2 Sealant 80016 Blue 81ml (3 Fl Oz.) | Slow-Drying Non-Hardening for Gaskets
Brand: Permatex
SKU: sxf2420
Price: 1219.00 INR
Availability: InStock

About this item

Permatex Form-A-Gasket #2 Sealant in blue provides a reliable seal for cut gaskets and stamped parts. This non-hardening formula ensures easy disassembly later, a key advantage for maintenance. It withstands temperatures from -65°F to 400°F (-54°C to 204°C) and resists common shop fluids and fuels, making it suitable for valve cover and oil pan gaskets. Imported for Indian mechanics, it offers a trusted alternative to local options.

This sealant is designed for applications where sealing is paramount over adhesion. Its slow-drying nature allows ample working time for precise application on flexible or stamped parts. The 81ml (3 oz) tube is convenient for various automotive repair tasks, ensuring a durable seal that stands up to engine bay conditions.

For Indian customers, this USA-sourced sealant offers proven performance. All customs duties and GST are included in the price, with delivery via ExpressBox. Compare its temperature resistance and fluid compatibility to local sealants for a superior automotive repair solution.

Key Features

Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications
Designed for dressing/sealing cut gaskets on flexible/stamped parts
Allows for easy disassembly if required; resists gasoline, oil and grease
Temperature Range: -65F to 400F (-54C to 204C)
Suggested Applications: Valve cover gaskets, and oil pan gaskets

Why choose this product

Proven Sealing Performance for Indian Conditions

Permatex Form-A-Gasket #2 Sealant is engineered for demanding environments. Its slow-drying, non-hardening formula ensures a reliable seal on cut gaskets and stamped parts, resisting common shop fluids and fuels. The wide temperature range, from -65°F to 400°F (-54°C to 204°C), makes it suitable for the high heat of Indian engine bays. This USA-sourced product offers a trusted alternative to local sealants, providing peace of mind for critical automotive repairs. It allows for easy disassembly, simplifying future maintenance tasks.

Who It's For vs. Who Should Skip It

This sealant is perfect for DIY mechanics and professional auto technicians in India needing a dependable, non-hardening gasket maker for valve covers, oil pans, and other stamped parts. It's ideal for applications requiring a strong seal that still allows for easy component removal. Skip this product if you need a fast-curing, permanent adhesive or a sealant specifically for high-pressure fuel lines; consider a high-strength RTV silicone for those applications.

How to use

Clean and dry all gasket surfaces thoroughly. Remove all old gasket material, oil, grease, and other contaminants. Ensure surfaces are completely free of moisture before application. — Prepare Surfaces
Apply a continuous bead of Permatex Form-A-Gasket #2 Sealant to one surface. Use the 3 oz (81ml) tube for controlled application. Ensure even coverage for a proper seal. — Apply Sealant
Assemble parts immediately after applying the sealant. Tighten fasteners to the recommended torque specifications. Allow adequate time for the sealant to set before exposure to fluids. — Assemble Parts
While non-hardening, allow sufficient time for initial setting before refilling with fluids. Check vehicle service manual for specific cure times. Test for leaks after refilling and running the engine. — Cure and Test

Example scenarios

Typical situations where Permatex Form-A-Gasket #2 Sealant 80016 Blue 81ml (3 Fl Oz.) | Slow-Drying Non-Hardening for Gaskets helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Mechanic in Delhi needs to reseal an oil pan gasket on a popular sedan during peak summer heat.

How this product helps

Using Permatex Form-A-Gasket #2 ensures a reliable seal despite ambient temperatures up to 45°C. Its non-hardening nature allows for precise placement and easy future removal if needed, unlike some local sealants that cure too quickly or become brittle.

Scenario 2

Illustrative example

Where it helps

DIY enthusiast in Mumbai replacing a valve cover gasket on a motorcycle, requiring a seal resistant to engine oil and humidity.

How this product helps

This USA-imported sealant provides excellent resistance to engine oil and common shop fluids. Its slow-drying formula allows ample working time in humid conditions, ensuring a proper seal that won't fail during monsoon season.

Specifications & installation

Specifications

Cure Type	Slow-drying, Non-hardening
Resistance	Gasoline, Oil, Grease, Common Shop Fluids
Temperature Range	-65°F to 400°F (-54°C to 204°C)
Prop 65 Chemicals	DEHP, Lead, Methyl Isobutyl Ketone

Installation & usage

Suggested Applications	Valve cover gaskets, oil pan gaskets, stamped parts, aviation applications
Application Method	Apply to clean, dry surfaces. Allows for easy disassembly.
Shelf Life After Opening	12 months (category default for sealants)
Contraindications	Not for permanent adhesion applications; not for high-pressure fuel lines.
Allergens / Common Irritants	Contains DEHP, Lead, Methyl Isobutyl Ketone (refer to Prop 65 warnings).

How we compare

Feature	Permatex Form-A-Gasket #2	Others
Type	Slow-drying, Non-hardening Liquid Gasket Maker	Varies by brand; often fast-drying RTV or hard-setting types
Temperature Resistance	-65°F to 400°F (-54°C to 204°C)	Typically -40°C to 180°C, varies significantly by brand
Fluid Resistance	Resists gasoline, oil, grease, common shop fluids	Varies; some offer good oil resistance, others less so
Disassembly	Allows for easy disassembly	Many local options cure hard, making disassembly difficult
Cost per Use	81ml tube — ₹15.05 per ml	Local 80-100ml tubes typically range from ₹250-₹450

SKU	sxf2420
GTIN	00686226800169
Brand	Permatex
Model Name	Form-A-Gasket #2
Part Number	80016
Color	Blue
Item Form	Cream
Material	SEALANT
Size	81ml (3 Fl Oz.)
Weight	0.2 pounds (3.2 ounces)
Dimensions	6.66 in L x 2.99 in W x 0.68 in H
Number of Items	1
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current Permatex Form-A-Gasket #2 Sealant 80016 Blue 81ml (3 Fl Oz.) \| Slow-Drying Non-Hardening for GasketsBuy Now	Weller ETP-5 Soldering Tip Set \| 5 PCS Conical 0.8mm (0.031")Buy Now	ProCase NRR 28dB Passive Noise Reduction Earmuffs \| Adjustable Metal Frame, Foldable Design, PinkBuy Now	Bentgo Salad Container, Lunch Bowl with 4-Compartment Toppings Tray, 1.9 L (54 oz) \| Leak-Proof Dressing Container, Reusable Fork, BPA-Free, Microwave & Dishwasher SafeBuy Now	JoyBros TriCut Replacement Brush for Dreame L40 Ultra Gen 2 X40 Ultra \| Fits L20 L30 X30 D30 D10 Plus Gen2, L10s Ultra Pro Ultra C20 Plus D9 Max Gen2, MOVA P10 P50 Pro Ultra E40 Ultra Robotic Vacuum CleanersBuy Now	STA-BIL Storage Fuel Stabilizer 4 oz (118 ml) Bottles — 24-Pack \| Keeps Fuel Fresh for 2 YearsBuy Now	AVANTEK Wireless Doorbell Kit 1300 ft Range, Black \| Waterproof Transmitter & 2 Plug-in ReceiversBuy Now
Spec
Price

Permatex Form-A-Gasket #2 Sealant 80016 Blue 81ml (3 Fl Oz.) | Slow-Drying Non-Hardening for Gaskets

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported