Permatex PermaPoxy 4 Minute Multi-Metal Epoxy 0.84 oz (25 ml) | Bonds Metals, Fills Gaps

• Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
• Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
• Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
• Temperature Range: -60°F to 300°F (-51°C to 149°C)
• Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

• Prepare Surfaces — Clean and dry all surfaces to be bonded. Remove any dirt, grease, oil, or old adhesive. For best results, lightly roughen surfaces with sandpaper or a wire brush.
• Mix Epoxy Components — Twist off the cap and place the syringe on a flat, disposable surface. Dispense equal amounts of Part A and Part B onto the surface. Mix thoroughly for 60 seconds until a uniform dark grey color is achieved.
• Apply and Assemble — Apply the mixed epoxy immediately to one surface. Join the parts within 4 minutes. Hold firmly in place; no clamping is needed due to the fast-setting formula.
• Cure and Finish — Allow the bond to cure for at least 4 hours before drilling, sanding, threading, or filing. Full strength is achieved after 24 hours. The bond is resistant to water and solvents.

Typical situations where Permatex PermaPoxy 4 Minute Multi-Metal Epoxy 0.84 oz (25 ml) | Bonds Metals helps — illustrative scenarios, not customer reviews.