onelinkmore Mini XLR TA4F 4-Pin Female Inline Connector 2-Pack | Solder Type for Shure Wireless Bodypack Repair

• REPLACEMENT CONNECTOR FOR SHURE BODYPACK TRANSMITTERS — TA4F 4-PIN MINI XLR: The TA4F (4-pin Mini XLR female) is the standard input connector on Shure wireless bodypack transmitters including BLX1, BLX1+ , GLXD1, GLXD1+, QLXD1, SLXD1, ULXD1, SLX1, ULX1, and PGX1 series. When your headset or lavalier mic cable's connector breaks, cracks, or loses contact, this inline female socket is the correct replacement part for field repair or custom cable building — avoiding the cost of replacing the entire mic or cable assembly.
• SOLDER-TYPE INLINE CONSTRUCTION — FOR CUSTOM CABLE BUILDING AND FIELD REPAIR: This is an inline cable-end connector (not a panel-mount socket). Thread your mic cable through the rubber grommet and strain relief boot, then solder the 4 conductors to the corresponding pins. The rubber grommet protects the solder joint from cable flex and mechanical stress at the entry point. Suitable for custom-length headset mic cables, lavalier cable rebuilds, and any application requiring a TA4F female connector on a cable end.
• COMPATIBLE WITH MAJOR WIRELESS SYSTEMS USING 4-PIN MINI XLR INPUT: Works with any wireless bodypack transmitter that accepts a TA4F 4-pin Mini XLR female plug, including: Shure BLX / GLX-D / QLX-D / ULX-D / SLX / Axient series; Audio-Technica cHR systems using TA4F input; and any third-party headset or lavalier microphone terminated with a 4-pin Mini XLR connector. NOTE: 4-pin Mini XLR (TA4F) is NOT the same as 3-pin Mini XLR — verify your transmitter's pin count before ordering.
• BRASS CONTACTS, BLACK METAL HOUSING — PRO-GRADE BUILD QUALITY: Machined brass contact pins with nickel plating ensure reliable conductivity and corrosion resistance through repeated connect/disconnect cycles in live sound environments. The black metal outer housing matches standard professional audio aesthetics and provides mechanical protection for the solder joint. Rubber strain-relief grommet prevents cable pull-out and reduces connector fatigue in active stage use.
• 2-PACK VALUE — REPAIR TWO CABLES OR KEEP ONE AS A SPARE: Mic cable connectors fail at the worst possible moments — mid-tour, pre-show, or mid-session. This 2-piece kit lets you repair two cables at once, or keep one as an on-hand spare in your gig bag or studio kit. Compact enough to carry in any audio accessories pouch alongside your wireless transmitter. Each connector ships with rubber grommet and strain-relief boot included.

• Prepare the Cable — Carefully thread your microphone cable through the rubber grommet and strain-relief boot. Ensure the cable conductors are accessible for soldering.
• Solder Connections — Solder the four conductors from your microphone cable to the corresponding pins on the TA4F female connector. Ensure clean solder joints for optimal conductivity.
• Secure and Assemble — Slide the rubber grommet and strain-relief boot over the solder joints to protect them from stress. Secure the connector housing to complete the repair or custom cable build.

Typical situations where onelinkmore Mini XLR TA4F 4-Pin Female Inline Connector 2-Pack | Solder Type for Shure Wireless Bodypack Repair helps — illustrative scenarios, not customer reviews.